1950 Chevrolet Truck - Sinister - Retro-Flect

Back In Black And Better For It

Kevin Lee
Jul 1, 2004
Photo 2/7   |   1950 Chevrolet Pickup 50 Chevy Pickup
Just because you start with something doesn't mean you'll finish with it. Jim Kipp can attest to that. Jim, who is fortunate to have the type of wife most gearheads are looking for, was searching for a truck after his wife Debra informed him that she wanted an old truck to run to Home Depot to haul stuff back to the garden in. Jim, being the good husband that he is, began a two-year search for the right old truck that would keep Debra happy. He finally found a '50 Chevy in a friend's (Randy Haapala) garage and managed to convince him to sell it to him for the sake of his marriage.
The downside was that the pickup had been Pro Streeted and was a little too wild for grocery-getting duties. After some deep thinking, Jim decided that the truck would need a new chassis. After some careful deliberation, he contacted Fred Ingle at Fred's Custom Wiring in Ontario, California, to head up the project. (Don't let the name fool you; he does quite a bit more than just wiring.) Soon after, Chubby Chassis in Fontana, California, was given the nod to take a stock frame and build a new foundation for the Chevy. Once the frame had been sufficiently reworked and new crossmembers installed, it was sent over to Fred's for the final assembly.
Photo 3/7   |   1950 Chevrolet Pickup 50 Chevy Pickup Rear View
With a new platform to build on, Fred started to transfer the old parts over to the new chassis. Then, just as these things almost always go, as the old parts were pulled off the old truck and evaluated individually, more and more of them were deemed unsatisfactory for the direction the rebuild was going. It wasn't long before almost everything had been replaced. In fact, the only parts that Jim and Fred used from the original running-and-driving Pro Street truck were the doors, hood, front bumper, grille, and airbag/shock combos.
As you can see from the photos, the finished truck is a work of art. The body consists of all-original sheetmetal that has been blocked and worked to perfection in preparation for the black finish. The truck is so eye-catching that when the Kipps first took it out to the 2002 Goodguys Del Mar show, they were stopped twice before they even had a chance to park and told that they had won two awards.
Photo 4/7   |   1950 Chevrolet Pickup interior
With the truck done, Jim not only had one super-clean '50 Chevy but another almost-complete one that consisted of all the unused parts from the original truck. Randy told Jim that he had a friend that was interested in trading some vintage gas pumps and lights for the truck; so Jim made the deal. But since its new owner had no where to store it, the truck wound up back in Randy's garage waiting yet another restoration.
Debra might not have ended up with a truck to haul plants, but we're sure she's just as happy with the final results as Jim - and who wouldn't be? The Kipps' Chevy is just about as perfect as you can get, which just goes to show that you don't really need a flashy color to make a truck standout - black can be beautiful.
Photo 5/7   |   Jim's original plan for the truck was to build something unique that he could take to Home Depot and haul plants and ground cover home for the garden. One look at the exotic Bubinga wood and shinny black bedsides, and we doubt it'll be hauling feathers anywhere anytime soon.
Jim & Debra Kip Where: Canyon Lake, California What: '50 Chevrolet
Frame / Manufacturer:
stock / Chevrolet
Modifications: boxed
Chassis builder: Chubby Chassis, Fontana, CA
Rearend / Ratio: Ford 9" / 3.50:1
Rear suspension: triangulated four-bar with Shockwaves
Rear brakes: 12" drums
Front suspension: Mustang II, Chubby Chassis dropped control arms, Shockwaves
Front brakes: 11" Granada rotors, T-Bird calipers
Master cylinder: GM with booster
Steering box: late-model Ford
Front wheel make, size: American Racing Torque Thrust IIs, 17x7 (3.5" bs)
Rear wheel make, size: American Racing Torque Thrust IIs, 17x11 (6.75" bs)
Front tire make, size: BFGoodrich HR4, 235/45R17
Rear tire make, size: BFGoodrich HR4, 305/45R17
Gas tank: custom stainless steel under bed
Year and make:
'02 Chevrolet
Displacement: 502 ci
Camshaft: GM
Heads: GM aluminum
Valve covers: GM
Manifold / Induction: GM aluminum
Ignition / Wires: GM HEI
Headers: custom 2.5" tubes, 3.5" collectors
Exhaust / Mufflers: custom 2.5" dual / Borla
Dress-up: Bitchin Products air cleaner, March Performance serpentine brackets and pulleys
Make and model:
Chevrolet 700-R4
Modifications: custom 2,200-rpm stall converter
Shifter: column
Body style / Material:
pickup / steel
Manufacturer: Chevrolet
Modifications: firewall recessed 5"
Hood: stock
Grille: stock
Bed: stock with custom tubs, tailgate latches and hinges
Bodywork by: Fred's Custom Wiring
Paint by: Fred's Custom Wiring
Paint type / Color: DuPont / black with clearcoat
Headlights / Taillights: stock / stockOutside mirrors: stock
Gauges: Beede
Stereo / Speakers: Pioneer head unit and speakers / Eclipse amp and 8" sub
Air conditioning: Vintage Air with BMW reciprocating outlet behind stock speaker grille
Wiring: Fred's Custom Wiring
Steering wheel: LeCarra Banjo
Steering column: ididit tilt
Seats: Glide Engineering bench
Upholsterer: Ron Mangus, Bloomington, CA
Material / Color: leather / dark saddle and tan
Carpet: wool square weave



Nissan Titan XD Walkaround

Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: