Subscribe to the Free
  • |
  • |
  • Custom 1968 Chevrolet C10 Pickup Truck - Resurrection

Custom 1968 Chevrolet C10 Pickup Truck - Resurrection

Bringing Life Back to a Classic

Galen Armenta
Dec 1, 2006
Photographers: Galen Armenta
Photo 2/8   |   "I just hated to see it collecting dust and no hope of it ever getting done." -Carlos Lockany
Billy Allen was a custom truck enthusiast, a truck builder whose passion was slammed trucks. Unfortunately, there is a reason why we are speaking in the past tense. After walking around this silver-clad truck in amazement over the detail and clean lines, we approached Carlos about taking a few snap shots to throw in your favorite mag. After chatting with Carlos, we found out that Billy was the person most responsible for building this C10, and Carlos had saved this awesome truck from who-knows-what.
It turns out that Billy had only driven this truck a handful of times, since it was painted and the interior somewhat put back together. Apparently, a couple spins around the block were enough, and he sold it to one of his friends, Carlos Lockany. Carlos watched this truck develop over time, as Billy got the body cleaned up by shaving off all of the unneeded fixtures and blocking the truck to perfection. Right after painting the truck, Billy decided to go on a different path in the form of an Impala SS. We know what you're saying, "Wow, how do you go from a sick 'bagged and body-dropped ride to an Impala?" We don't know. Only God and Billy have that answer.
What Carlos told us is that he wanted this truck for a long time and didn't want to see it collecting dust with no hope of it ever getting done. Since there was a lot of work still left to finish the truck and bring it to the level of show winner, there was no shame in him picking it up. We would've been heartbroken ourselves if someone didn't take the extra steps to make sure that this truck got its moment of fame.
With the body and paint in great shape, Carlos concentrated on the mechanical aspects. He dropped in a 350ci crate motor and topped it with Vortec heads, a Holley carb, and a Flowmaster exhaust. Also added were a Turbo 400 with a shift-improvement kit and a stall converter. A new 3.73 limited slip for the rearend was installed to help keep the new power where it's needed most...on the ground.
Leather and suede greets passengers inside the cabin, covering everything from the '87 Nissan Hardbody seats to the door panels (all the way to the glass), and even the headliner and dashpad. The dash has plenty of class with updated Pro Comp gauges and a Billet Specialties steering wheel. And there's an Alpine head unit and JL Audio stereo gear mounted into a custom-made enclosure behind the bucket seats to provide sounds. Although Carlos has made it to that elusive finished state, he still has several mods he'd like to make to the Chevy, but they'll have to wait. Right now, he's having too much fun cruisin' the rig to think about wrenchin' on it.
THE 411

Owner/hometown: Carlos Lockany / Dunn, North Carolina
Year/make/model: '68 Chevy C10
Engine/drivetrain: 350 V-8 GM crate motor / Vortec heads / Turbo 400 transmission / 3,200-stall converter / Edelbrock manual fuel pump / Flowmaster exhaust / 3.73 rear gear ratio / 10-gallon fuel cell relocated to the bed
Installers: Tommy Bailey / Knightdale, North Carolina
Wheels/tires: 20-inch American Racing Motto 1s / 5-inch backspace / Hankook 225/35R20s
Suspension: (Front) modified front spring mount / Z'd front clip / Firestone 2600 air spring / (Rear) C-notch / trailing arms / Panhard bar / Firestone 2600 air springs / MIC 1/4-inch manual valves / 1/4-inch air line / two Viair 450c air compressors / 5-gallon air tank
Fabricator: Billy Allen of Ashboro, North Carolina / Rich Thompson of Graham, North Carolina
Body Mods: Shaved door and tailgate handles, cowl vent, gas hole, driprail, taillights, antenna, and front turn signals / frenched license plate box / body-dropped 3-1/2 inches / molded tailgate / tubbed rear fenderwells / radiused bed corners / color-matched Line-X
Bodyman: ABS Body Shop of Ashboro, North Carolina
Paint: House of Kolor Orion Silver
Painter: ABS Body Shop of Ashboro, North Carolina
Interior: Modified '97 Nissan Hardbody bucket seats / leather and suede Katzkin / smoothed and painted dash / air gauges and manual valves mounted in the middle of dash
Upholsterer: JB's Upholstery of Raleigh, North Carolina
Audio/video: Alpine CDA-9851 mounted inside glovebox / JL Audio 6.5-inch components / JL Audio 300/2 amplifier / one JL Audio 10W6 subwoofer / JL Audio 500/2 amplifier / custom-built color-matched sub box behind seats
Installer: CAR Audio and Security of Wake Forest, North Carolina
Club: Severed Ties
Special Thanks: Billy, Tommy, all the Severed Ties North Carolina Chapter, and his wonderful wife Angela


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: