Subscribe to the Free

1993 Mitsubishi Mighty Max - Daily Gone Wrong

As Told By The Owner

Joseph Murphy
Jul 1, 2007
Photographers: Joseph Murphy
Photo 2/11   |   1993 Mitsubishi Mighty Max right Front
This will be a little different from what everyone is used to reading. This is the story of a Mitsubishi Mighty Max, as told by the owner, Joseph Murphy. I have always been a Mitsubishi guy, ever since 1995, when I first bought a '93 Mighty Max. This was the truck that started it all for me. It went through every phase, from wire wheels, to 15-inch billet wheels, to finally 'bagged and shaved on '17s. It came to the point in 2001 to sell my baby and leave this all behind me, but it wouldn't be for too long.
In the next three years, I had a few cars and even owned a PT Cruiser, which I played around with. That started the bug again. In early 2004, I sold a house, made a little profit, and tried to buy my '93 Mitsubishi back from the guy who bought it from me. Well, things did not work out, and he sold it the day before I was to purchase it. So, I convinced my wife to let me buy a daily driver that I would do minor work to. Meanwhile, my father and I searched around for another Mighty Max. This took a few weeks, and we found a '91 Mighty Max with high mileage and a worn suspension. I knew that was not a problem because I had all of my warranty receipts-free replacements from the '93 Mighty Max. So, we picked it up for $900, and that was the beginning of the daily driver gone wrong.
Photo 3/11   |   1993 Mitsubishi Mighty Max rear Suspension
We first lowered the truck with spindles and springs, while in the back were blocks and air shocks. I still had the KMC Units from the PT Cruiser in the garage, and so I decided to do the 5-lug swap since it was cheaper than buying new wheels. I also updated the front end with the newer grill and 4Runner bumper. This lasted for a few months. I drove it to and from work, cruised with my friends, and then I heard that Rob Rodell was doing suspension work again. This brought back all the memories from my '93 Mighty Max. Rob was the one that 'bagged it back in the day. I called up B&C Off-Road, talked to Rob, and was given a price I could not refuse to get this one 'bagged. When I got it back, it was worth every penny of it. The only bad thing was, the suspension work was too nice for the condition of the truck. This was when I decided to go ahead and shave and paint the truck.
Photo 4/11   |   1993 Mitsubishi Mighty Max steering Wheel
The truck was now losing the title of a daily driver. I contacted my friend, Brian Hill, who had done the interior of my '93 Mighty Max, and we decided to give this truck a little style. We decided to go with the Ostrich because it was a little bit different for a minitruck. By this point, the bug had really bitten me. It was only a few months until a friend of mine called and offered me a set of 20-inch wheels at a great price. So, they went on the truck, but this raised the truck off of the ground, and that was not acceptable. Next, I contacted Rob to see if he wanted to tackle the task of body-dropping the truck with the new wheels. Of course, the guys at B&C were up to the task. I took the truck to Gator Drag, and a week later, it was at B&C. When I dropped off the truck, it was going to get a traditional body-drop, but the guys surprised me with a stock-floor body-drop. Any extra room for a big guy is always good.
I am sure things on the truck will change from time to time. I am already planning on a new paintjob and some more work on the interior. But for now, I am enjoying the truck as my daily driver-if you count driving it Friday, Saturday, and Sunday as being daily.
Photo 5/11   |   1993 Mitsubishi Mighty Max wheel
Rolling Attire
Wheels (Front): 20x7.5 Motegi DP6
Wheels (Rear): 20x7.5 Motegi DP6
Tires (Front): 225/30R20 Nankang NS II
Tires (Rear): 225/30R20 Nankang NS II
Misc.: Hubs in front, re-drilled to five-lug and rear-end swapped for a Toyota five-lug.
Performed by: Mike Brott
City/state: St. Joseph, Mo
Suspension type: 'Bags
Front suspension: 'Bags
Rear suspension: Four-link
Airbag/cylinder type and size:
Front: Slam RE 6
Rear: Firestone 2500
Spindles/Springs: Chassis Tech 2-inch drop spindles
Shocks: Belltech 2-inch drop shocks in front and 2-inch Travel Chrome Off-Road shocks in the back.
Valves: GC 450 Extremes
Compressor: VIAIR 400
Air Line: 1/2
Frame mods: Stock-floored to lay pinch on '20s. Front Frame Z'ed 1 inch.
Frame material: Stock frame
Gas tank: Sectioned 1 1/2 inches and raised in stock location
Detail work: All-new body mounts. Motor was lowered 1-inch, Firewall tubbed for the '20s
Misc.: All work was done to keep the stock hood and air conditioning
Performed by: B&C Off-Road
City/state: Pasadena, Texas
Photo 6/11   |   1993 Mitsubishi Mighty Max left Rear Angle
Shaved: Doors, tailgate, antenna, cab light, hood squirters and bed seams
Body-dropped: Stock-floored, by using the stock frame
Front end: Upgrade to 93-96 front end with Toyota 4Runner bumper
Taillights: Old-skool clears all aroundExterior bolt-ons: Mazda B-series chrome mirrors
Performed by: Trevor Knapp
City/state: San Antonio, Texas
Brand and colors: Dupont Hot Hues Psycho Silver, underneath Dupont True Blue Candy
Performed by: Brent Sharp
City/state: Kirby, Texas
Seats: 2000 Civic Si seats
Material: Vinyl and ostrich
Dash: Stock
Door panels: Two-toned with graphics (vinyl and ostrich)
Flooring: ACC carpet
Headliner: Two-toned with graphics (vinyl and ostrich)
Misc.: Back wall was also covered in ostrich with graphics
Performed by: Brian Hill (Ultra Threads)
City/state: San Antonio, Texas
Head unit: JVC KD-AVX1
Mids and highs: Boston Acoustics
Amplifier for mids and highs: DB Speed
Subwoofers: JL WO 6"
Amplifier for subwoofers: DB Speed
Custom fabrication: Custom boxes for JLs.
Performed by: Chris Stevens
City/state: San Antonio, Texas
Photo 7/11   |   1993 Mitsubishi Mighty Max engine Intake
Displacement: 2.4 Liters
Model/year: '91 Mighty Max
Number of cylinders: Four
Intake: Honda Accord intake with 3000 GT filter and adapter
Header/exhaust: Pacesetter header for 4g63. 2 1/4 pipe, with an APC mufflerDriveshaft: Custom-made to fit the Mitsubishi Transmission to the Toyota Axle
Rear-end type: '90 Toyota with 3:73 gears
Detail work: Chrome and powdercoated some pieces, vacuum lines were replaced, and spark plug wires to match
Performed by: Joseph Murphy
City/state: Live Oak, Texas
Photo 8/11   |   1993 Mitsubishi Mighty Max front
I want to first thank my wife, Janet, for letting me build my dream. Even though she does not like the truck, she still lets me follow my passion. I promise, the next one will be a classic. I want to thank my father, for giving me the first taste of customs with the countless Mopars that we have owned. He showed me it was always better to drive something that nobody had. I also want to thank Rob, Kevin, and Ronnie at B&C Off-Road for all of their hard work. I also want to thank all of the friends I have gained in my many years in this sport. I am sure I will make many more.



Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: