Subscribe to the Free

2000 Chevy S10 - Alive And Bumpin'

Not Only Is It Low, But It Has Plenty Of Speakers To Make Serious Noise

Kevin Aguilar
May 1, 2008
Photographers: Kevin Aguilar
Photo 2/14   |   2000 Chevy S10 front Left View
Although Tom Glass is in his late 40s, he likes to have fun and drive mini-trucks as if he's still in his 20s. He admits most of the guys he knows that are his age aren't as actively involved in their hobbies as he is, let alone have custom trucks in their garages. Despite his peers' relative lack of enthusiasm, Tom is fully into the scene and has no qualms about owning a low and clean show truck. In case you were wondering, Tom is not going through a mid-life crisis. In fact, he's been customizing vehicles since he was a kid.
Tom's father was a really big do-it-yourselfer, and it's from him that Tom picked up the skills to wrench. Tom started off working on trucks and eventually went on to a career in the automotive field-at first on the mechanical side and later on in retail parts sales. He gained years of experience in the industry, so when a good friend asked him to help with the start-up of an audio shop he was well up to the task.
As a way to help promote the upstart shop, Tom set up booths at and attended many auto shows. At these shows, Tom met Alan "Farva" Jackson, who owned an audio-heavy '00 Chevy S-10. It caught Tom's attention for two reasons: First, he loves mini-trucks. Second, it sported the same audio equipment he was selling. The latter really piqued his interest in that he envisioned the truck as a mobile showroom of Memphis Car Audio equipment. All that gear was mounted in custom fiberglass panels, and the interior's center console boasted nine amplifiers for the excess of speakers in the cab and subwoofers mounted in a blow-though enclosure.
It wasn't just the Chevy's interior that caught Tom's eye (and ear)-the truck had clean exterior features as well. The first thing he noticed was the frame-scraping stance achieved with a set of airbags on all four corners along with drop spindles up front and a triangulated four-link in the rear. The body itself was also transformed with a GMC Envoy front end and a cleanly shaved bed. The factory pewter color was painted Viper Blue to distinguish the vehicle as custom.
When Tom first saw the truck, Farva had just recently swapped out the original four-cylinder engine for a 4.3L V-6 from an S-10 Xtreme. Though the kinks involved in this swap hadn't yet been worked out, Farva needed to sell the S-10 in order to fund his "Blazerado" project. Tom opted to buy the truck and get it back to optimum operating condition. The deal was perfect for him because not only would he get to own a clean show truck, he would also have a great marketing platform for the audio shop.
Once Tom had the keys, he got the S-10 running smoothly by changing the rearend gears to a set of 3.23s. One kink unkinked. Another kink was that the truck tended to shut down at highway speeds. Tom figured out that all he needed to do was change the speed sensor on the transmission for a proper match. After fixing these driving issues, Tom added a few performance parts to give the 4.3L more kick. Then, it was finished with steel-braided hoses and a billet dress-up kit.
With everything fixed up, Tom now drives this truck to all shows within a couple hundred miles of his hometown. It does well as it's an all-around clean truck with a gnarly sound system. It just goes to show that you're never too old to own a nice ride.
The 411
Owner/hometown: Tom Glass / Hopkinsville, Kentucky
'00 Chevy S-10
4.3L V-6 from an S-10 Xtreme / COMP Cams camshaft kit / MSD coil / Taylor plug wires / Injen polished cold-air intake / Hypertech power programmer / JBA headers / 300-amp alternator / stainless steel exhaust with Flowmaster muffler / Stinger battery / stainless steel braided hoses / Billet Specialties dress-up kit / automatic transmission / factory rearend with 3:23 Richmond Gear gears
By: Wicked Kustoms, La Vergne, Tennessee / Owner
Front: 18x8 Center Line Dagger with 4.5-inch backspacing
Rear: 18x9.5 Center Line Dagger with 4.5-inch backspacing
Front: 225/40R18 Kumho
Rear: 265/35R18 Kumho
Front: Belltech drop spindles / Firestone 224c airbags / custom mounting cups
Rear: Pete & Jake's triangulated four-link / Firestone 224c airbags / Gabriel shocks
Accessories:Air Lift engine-driven compressor / backup Viair 450 compressor / SMC valves / 12-gallon air tank / gas tank raised
Chassis: Rear C-notch / shortened transmission crossmember
By: Wicked Kustoms
Body Mods:
'00 GMC Envoy front clip / billet upper and lower grilles / Street Scene hood and mirrors / shaved antenna, fuel door, upper of front bed steps, tailgate handle, taillights, rear steps, and Grant Kustoms roll pan / LED taillights / tonneau cover
By: Tommy Boshers, Pulaski, Tennessee
Custom Paint:
Spies Hecker Viper Blue
By: Carlton Hunter, Nashville, Tennessee
'89 Acura Integra bucket seats reupholstered in Symphony suede and Landau black vinyl / smoothed and painted dash / reupholstered door panels with fiberglass speaker pods on bottom / custom-made center console to hold amps for stereo / blow-through box for subwoofers / Trenz billet steering wheel, shifter handle, and rearview mirror / A/C controls relocated to glovebox
By: Kaze Williams of Audio Visions, Murfreesboro, Tennessee
Eclipse CD8053 head unit / two 4x6-inch Memphis Car Audio speakers / two 6.5-inch Memphis speakers with tweeters / 8-inch Memphis speakers with tweeters / two 6x9-inch Memphis speakers / 150-watt Memphis amp for speakers / three 300-watt Memphis amps for speakers / two Memphis 8-inch subwoofers / four Memphis LVS 12-inch subwoofers / four Memphis Studio 1,000-watt Class D amps for subwoofers / Memphis 300-watt amp for subwoofers / AAMP of America professional Stinger wire / four Optima YellowTop batteries in bed
By: Kaze Williams
Special Thanks:
Alan Jackson, wife Teresa and daughter Traci for their support, Vaperz, Wicked Kustoms, Audio Visions, Tommy Boshers, and Carlton Hunter


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: