Subscribe to the Free

1995 Chevy S-10 - First Time's A Charm

Cody Stoute Applied His Newfound Skills In Building This '95 Dime

Kevin Aguilar
Jul 1, 2008
Photographers: Kevin Aguilar
By the look of this '95 Chevy S-10, you probably couldn't tell that a first-timer built it. That's right, Cody "Popeye" Stoute brought this truck to completion without any experience. Though he developed a love for custom trucks riding around with his brother in a lowered '93 Isuzu Pickup, he wasn't familiar with actually working on them. With a desire to learn more, Cody picked up some truck magazines and was captivated by some of the more radical customs he saw.
Eager to get his start, Cody got a job at a shop called John Wayne Body & Paint in Scott, Louisiana. He found the job by searching through the classified ads of his local paper. He figured if he got the position, he could pick up the skills needed to make a nice truck. Luckily for him, he got the job, and John, the owner of the shop, was willing to teach him everything he wanted to know.
In a short time, Cody became very familiar with paint and body and felt he was ready to tackle customizing a vehicle. He heard about an S-10 that was already body-dropped and up for sale. Not only had he earned enough money to buy the truck from working at the body shop, but he had picked up the necessary knowledge to start building it too.
Cody played around with the Chevy for a while, dragging body and showing off, and eventually the bed became damaged enough that it had to be replaced. He swapped in a new bed to clean up the truck's appearance and also updated the front end with one from an '00 Sonoma. Then, with some minor adjustments to the suspension, the truck was cut and tubbed to fit a set of 20-inch Boss Motorsports 304 rims.
The S-10 was lying low and tucking big wheels, so Cody moved onto the bodywork and shaving all of the exterior sheetmetal. Of course, this meant that the usual items like the door handles, fuel door, and tailgate were deleted in order to clean up the body lines. Afterward, he was able to work the surface straight in preparation for paint. Since Cody likes the look of simple two-tones, he painted the truck in Surreal Green and Lunar Mist with a Sunburst Orange pinstripe.
You can see how nice the paintjob turned out, and it inspired Cody to add the same colors to the interior. All of the interior plastics were smoothed down and prepped for paint. When it came time for the dash, he decided to take it a step further and make one out of sheetmetal. After everything was painted, he installed a bench seat from an Isuzu pickup and a custom-made tall shifter to add a slight retro touch.
Cody brought together a lot of great ideas and executed them in a high-quality fashion. It's pretty amazing to think that he went from knowing very little to creating a one-of-a-kind masterpiece. It goes to show that with hard work and determination anyone can pick up the skills needed to build the truck of his dreams.
Photo 8/8   |   1995 Chevy S10 isuzu Pickup Bench
The 411

Cody "Popeye" Stoute / Carencro, Louisiana
'95 Chevy S-10
2.2L four-cylinder / cold-air intake / custom exhaust with IMCO muffler
By: Owner
Front & Rear: 20x8.5 Boss Motorsports 304
245/35R20 Nankang
Rear: 255/35R20 Nankang
Chassis Tech upper control arms and drop spindles / Air Ride Technologies lower control arms / Chassis Tech 255C airbags
Rear: Pete & Jake's triangulated four-link / Chassis Tech 255C airbags / Monroe shocks
Accessories: SMC valves / nitrogen bottle in bed / custom-made aluminum fuel cell
CHASSIS: Front clip raised for body drop / custom frame from the firewall back made of 2x4-inch steel tubing
By: Warren Stanbro, Carencro, Louisiana
Body Mods:
'00 Sonoma front clip with billet grille / shaved antenna, firewall, hood squirters, door handles, third brake light, fuel door, taillights / factory rear bumper shaved of upper plastics and license-plate lights frenched / sheetmetal inner bedsides with custom wheeltubs / color-matched spray-on bedliner / LED lightbar between tailgate and rear bumper / Street Scene mirrors / smooth wiper cowl with billet caps
By: Owner
Custom Paint:
PPG Surreal Green and Lunar Mist broken up by Sunburst Orange pinstripe
By: Owner
Custom sheetmetal dash / bench seat from an Isuzu pickup recovered in gray vinyl / lower portion of painted door panels fiberglassed to kick-out speakers / all interior plastics smoothed and painted / custom-made tall shifter with revolver knob / Billet Specialties Classic steering wheel / custom-made speaker box in rear of cab
By: Owner
Alpine CDA-9820XM head unit / 6.5-inch MA Audio components in doors / 12-inch MA Audio subwoofer / Lunar 60x2 amplifier for subwoofer
By: Owner
Special Thanks:
His parents, Colby Cormier, Skylar, John Wayne, Becky and Jake Prejean, Chico, Donnie, Wes, Mike, Kris and Trey of KIK, Elton and Mary Jo, Borills Auto Trim, Guidry's Iron Works, Speedie, Kevin Angellee, Chops, Tommy and Tony at Safelite AutoGlass, and Jason VX


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: