1989 Chevy C1500 - Timeless
Hollis Foutch's body-dropped C1500
When GM rolled out all-new fullsize trucks for the 1988 model year, the custom truck world exploded. Buyers flocked to the new, clean body style and rejuvenated the custom truck culture. Truckin' was all over this movement as parts for these great-looking trucks were everywhere. We've featured scores of '88-'98 Chevy and GMC trucks since, but it's still hard to imagine that some of these trucks are now over 20 years old. With a few exceptions, like modern wheels and stereo components, Hollis Foutch's '89 Chevy C1500 looks like it could have been built in 1989. Not that there's anything wrong with that, it just proves that subtle, clean trucks will never go out of style.
The popularity of '88-'98 Chevy trucks means that it takes a little more work to get one to stand out in a crowd. Since Hollis had already decided on keeping the body and paint simple, a body drop was in order. Using 1/4-inch wall 2x3-inch rectangular tubing, Hollis reinforced the factory frame to perform a stock-floor body drop. The truck's body mounts were relocated 31/2 inches lower and the bed floor was cut out along the entire perimeter and welded back in with the wheelwells nearly flush with the bedrails to clear the C-notch. With little room in the wheelwells to work with, Hollis used tubular control arms 3/4-inch shorter than factory, Belltech 2-inch drop spindles, and Slam Specialties RE7 'bags and Belltech Nitro Drop 2 shocks. The rear also uses RE7 'bags and Belltech shocks, but this time on a cantilevered two-link that locates a 12-bolt rear that was narrowed 7 inches and filled with Moser axles. B.A.D. Mauler wheels and Nitto NT420S tires were chosen for the silver Chevy, 22x81/2 inches with 255/30R22 tires in the front and 22x10 inches with 295/30R22 Nittos in the rear.
Sticking to the theme, Hollis kept the interior low-key and worked on making every surface look custom. Nearly every bit of plastic in the interior was smoothed and painted before new black carpet was installed. Brad Stevens at DBS Rod Shop in Checotah, Oklahoma, upholstered the low-back buckets and headliner in black leather with ostrich inserts that are both custom and luxurious. A full complement of billet trim adorns the switch panels on the doors, the gauges, light switch, and HVAC controls and ducts. Sill more billet comes in the way of pedals, a column shifter, and a full-billet B.A.D. Mauler steering wheel that matches the 22s on the corners. For plenty of audio while cruising Main St. or the showgrounds, a JVC KD-BT1 head unit sends signals to speakers in the factory locations.
Hollis' job has him working on sheetmetal every day, and his experience as a body man paid off when it came time to sort out the panels on his '89 regular cab. Hollis, along with Brad Stevens at DBS, removed all of the unnecessary and distracting blemishes from the truck's surface. Gone are the door handles, third brake light, stake pockets, taillights, and rear bumper. With all of the holes in the sheetmetal filled and smoothed, Hollis welded in a roll pan and flush-mounted two 12-inch LED strips to serve as tail lights. The front of the truck is also simple and clean, as a smooth front bumper and factory grille shell were prepped to match the rest of the truck's Prowler Silver paint from Lesonal. A billet grille insert and a billet Bow Tie are the only adornments and make for an understated overall look that will keep his truck looking fresh for years to come.
Special thanks go out to Hollis' wife Jennifer, Brad Stevens, and Jeremy Rhoden, all of whom helped make the truck a reality, and might be called upon when Hollis begins his next wave of customization.