Exclusive Content
Original Shows, Motorsports and Live Events
Due to the EU’s Global Data Protection Regulation, our website is currently unavailable to visitors from most European countries. We apologize for this inconvenience and encourage you to visit www.motortrend.com for the latest on new cars, car reviews and news, concept cars and auto show coverage, awards and much more.MOTORTREND.COM

1984 Ford Bronco ll - Flat Ford

An Suv With An Old-School Twist

Brandon Burrell
Nov 1, 2010
Photographers: Brandon Burrell
Owner: William "B.J." Boden
Ride: 1984 Ford Bronco ll
Hometown: La Salle, MI
Photo 2/10   |   1984 Ford Bronco Ii front Right View
When it comes to finding feature vehicles, we usually come across them while cruising shows or we'll catch wind of one that is about to come out of the shop.
This time, however, we found this beauty sitting in the hotel parking lot during the weekend of the Layd Out at the Park show. First glance and we knew this was something we had to get out to readers before anyone else, and we knew everyone else would love it just as much as we do!
Once at the shoot and talking with the owner, B.J. Boden from La Salle, Michigan, about his project, B.J. mentioned he had been into minitrucks since high school. Since the minitruck bug is one you seldom shake, he said it's kind of funny looking back because his first truck was rusted so bad that you could see through it. Now, he was getting shot for Mini Truckin' magazine. It just goes to show you never know where life will take you if you stick to your passion.
Photo 3/10   |   1984 Ford Bronco Ii dash
Starting with that high-school truck led to a couple more custom trucks, but after searching for an F-100 like he used to help his grandfather with, B.J. quickly realized that a truck like that was out of his price range. He had always loved the styling of the Bronco II and came across a good deal on one and decided to pick it up and try to bring some of the old Effie style to it to pay tribute to his grandpa.
Since the Bronco II started off as his daily driver, B.J. started the project by lowering it and shaving the handles and marker lights until he could save up enough dough to put it on the ground. B.J. ended up modifying the stock chassis twice since he wasn't happy with it the first time. This sufficed for a while, but the bug continued to grow and B.J. felt the need to go much further. So, the truck was completely torn apart and a full chassis was built, the bodywork was finished, and the motor was swapped to a flathead. Wait... what!? Yes, you heard right, this killer Bronco II features some bitchin Effie old-school tricks.
Photo 4/10   |   1984 Ford Bronco Ii engine Part
Unfortunately, this is about the time money got tight and B.J. had to let his project sit for a while so he could save up some more money to make his dream of being in Mini Truckin' a reality. They say good things come to those who wait, and this was no exception. Once things came back around, it was full force on the build. Building the custom interior, which includes a Galaxy dash and a bench seat, painting the motor and all of the suspension components, and wrapping up the bodywork one last time all brought the SUV that much closer to being done. After some measurements were made, a grille from a 1953 Ford F-100 was sectioned to fit the Bronco's front end. Since B.J. was going for the old-school Ford theme with this truck, he opted to keep the top half a flat black then do the bottom half a bright green so it wouldn't be your typical two-tone paintjob.
Photo 5/10   |   1984 Ford Bronco Ii grille
With the truck done and finally being shot for his 15 minutes of fame, we asked B.J. if there were any crazy things that happened during the build. After a couple laughs, he said, "Make sure to always tighten your fuel lines" because he forgot to tighten one and a small fire started when the truck backfired while testing the motor in the garage. He also mentioned to make sure to use good, solid drill bits. He had one shatter and it broke out both rear quarter windows at the same time. That's something you couldn't duplicate if you tried.
Photo 6/10   |   1984 Ford Bronco Ii right Side View
For more info on B.J.'s one-of-a-kind Bronco II, be sure to check out the Lowdown and look for it roaming around shows in the Northeast.
Rolling Attire

Wheels: 17x7 American Racing TorqThrusts
Backspace: 4.5 inches
Tires: 205/45ZR17 Kumho
Photo 7/10   |   1984 Ford Bronco Ii emblem
Chassis Modifications
Suspension (front): S-10 front clip, Air Lift Dominator 'bags
Suspension (rear): Solid axle with six-link, Air Lift 2B7 'bags
Control Arms: Barely Legal arms owner modified to fit
Valves: 3/8-inch Air Lift
Compressors: Two 380 Viairs
Air Accessories: Two 3-gallon tanks painted to match
Frame Mods: S-10 front clip and back-halved
Frame Material: 2x3 box tubing
Gas Tank: Miller Lite beer keg
Brakes: Rear disc brakes off a Chevy Extreme
Detail Work: Painted control arms, brake calipers, and six-link
Performed By: Owner and Linda Dunn
Body Modifications
Shaved: Mirrors, taillights, gas door, front bumper, front and side marker lights, cowl, drip rails, door handles, and wipers
Bodydrop: Stock-floor
Front End: 1953 Ford F-100 grille sectioned to fit
Back End: Hand-made rollpan
Taillights: LEDs molded in the hatch
Performed By: Owner
Photo 8/10   |   1984 Ford Bronco Ii tailgate
Brand & Colors: Electric Metallic Lime Green and satin black
Style: Two-tone
Pinstriping: Old-school hand-painted stripes on sides, hood, hatch, dash, and interior panels
Performed By: Jordan Fritz and Mike Kluczynski
Seats: Single bench seat
Material: Black tweed and suede
Dash: 1962 Ford Galaxy dash sectioned to fit
Door Panels: Sheetmetal painted to match
Center Console: Sheetmetal made to house the radio and gauges
Misc.: Everything is two-toned and striped to match the outside; handmade steering wheel out of left-over connecting rods and piston from a 302
Performed By: Owner and James Heilman
Photo 9/10   |   1984 Ford Bronco Ii tanks
Head Unit: Kenwood
Mids & Highs: Kicker 6-inch up front and Kicker 6x9 in rear
Performed By: Owner
Displacement: 239 / 8BA flathead Ford
Camshaft: Isky mild cam
Transmission: Ford AOD
Rearend: S-10
Intake: Edelbrock four-barrel
Header/Exhaust: Handmade headers
Ignition: MSD Pro-Built distributor 6AL
Driveshaft: Custom-made by Lays Transmission
Battery: Optima
Performed By: D.A.S Performance and Owner
Photo 10/10   |   1984 Ford Bronco Ii engine
Special Thanks From Owner
"Thanks to Temperance Body Shop, Marks Industrial, and D.A.S. Performance for all the work and tool access-I couldn't have done it without them. I can't forget all my friends who gave up hours and hours on end not to mention some sweat and blood just to make my dream come true. I must mention the ones who were there the most: Jason Dwornik, Kevin Trapp, Jordan Fritz, James Heilman, Mike Kluczynski, Pat Snyder, Brian Tibai, and my wonderful girlfriend, Linda Dunn, for all her support."