Subscribe to the Free

1996 Chevy S-10 - Green Inspiration

'60s Custom Turned Mini

Mike Alexander
Nov 1, 2010
Photographers: Mike Alexander, Henry Z. De Kuyper
Owner: Steve Wilk
Ride: 1996 Chevy S-10
Hometown: Moreno Valley, CA
Club: No Regrets
Photo 2/10   |   1996 Chevy S10 front Right View
Inspiration comes from all sorts of places. Many of us look to car shows, magazines, internet forums, friends, family, and more to draw inspiration for our latest custom creations.
But Steve Wilk from Moreno Valley, California, looked a little deeper for inspiration for the buildup of his 1996 S-10.
Steve has been a fabricator at Bio Kustumz for more than seven years, and in that time he's been around the block once or twice when it comes to building killer customs. But when he first started this S-10, he and his buddies didn't have the slightest clue and couldn't even tell you what the difference is between a stock-floor bodydrop and a traditional bodydrop. Keep in mind, the first time Steve cut up this very same S-10 to bodydrop it was before he had put in some serious suspension fabrication time with Bio under the watchful eyes of Max Fish. Everyone starts somewhere, and Steve started at the bottom and worked his way up, soaking up everything he could about building customs.
Over this time period, Steve met and became friends with Larry Watson, one of our favorite American custom icons. Larry Watson is synonymous with crazy and wild ideas and custom builds and paintjobs that were way radical, especially for his time. Watson painted the X-Sonic, which was the first car on hydraulics back in the early '60s and is credited for many innovations in the way of '60s customs.
Steve wanted to pay tribute to guys like Larry Watson and Gene Winfield who pioneered the true custom vehicles that we all know and love. Steve drew inspiration from these builders and wanted to build a clean yet custom mini with that throwback '60s kustom style. We'll be the first to admit that it takes some serious cajones to throw a set of Astro Supremes on a custom minitruck, but when done right, man does it look good! Steve and his good buddy "Painter Shak" Mike designed this paintjob based on a 1955 Ford that Larry Watson painted way back in 1958. Wanting to really pay tribute and homage to the custom icons of our past, Steve stayed true to this style by building a heavily modified truck that doesn't look it. In fact, that's the trick to building any killer custom-modifications that are done so well they look factory.
Photo 6/10   |   1996 Chevy S10 front View
After Steve and Mike were happy with the killer throwback paint work, it was time to turn to James Mendoza at A&C Upholstery. He was commissioned to do the same look in the interior, heavily modified but still look factory, and well, James nailed it! The interior work is just as flawless as the exterior, creating an entire custom package that screams subtle yet really honors the custom heroes of our past. Congrats buddy, you nailed it! Due to the clean American custom tribute, Steve has been offered a spot at the 2010 Mooneyes Yokohama Japan Hot Rod Show in December of this year. This means he will be the first American minitrucker to have his truck on display in Japan. What an honor!
For more information on this clean custom, scope out the Lowdown.
Rolling Attire

Wheels: 15x7 Astro Supreme
Tires: 205/75R15
Photo 7/10   |   1996 Chevy S10 left Side View
Chassis Modifications
Suspension (front): 'Bagged with drop spindles
Suspension (rear): Four-link with 'bags on bars
Shocks: Custom Bilstein from RCD Classics
Compressors: Dual Viair 380s
Air Accessories: Firestone 2600s and SMC valves
Frame Mods: Step notch
Performed By: Owner
Body Modifications
Shaved: Door handles, tailgate handle, taillights, rear bumper, gas door, rain gutters, third brake light, door jambs, antenna, hood squirters, firewall, and core support
Bodydrop: 3-inch traditional
Body Mods: Custom Grant front bumper, custom-molded LEDs in rear bumper
Bolt-ons: 1998 S-10 front end
Performed By: Owner
Photo 8/10   |   1996 Chevy S10 tire
Brand & Colors: Some green out of a book and then mixed a custom green for the scallops
Misc.: Based on a 1955 Ford Larry Watson painted in 1958
Performed By: Bodywork by Nostalgic Restyling, paint by the Painter's Shak
Seats: Cut-up and refoamed bench out of a 1989 S-10
Dash: Smoothed-out and wrapped stock dash
Misc.: Custom headlight switch and stereo bezels and smoothed-out door panels
Performed By: James Mendoza at A&C Upholstery
Photo 9/10   |   1996 Chevy S10 custom Interior
Head Unit: Old Pioneer
Performed By: Owner
Engine: Stock 2.2
Intake: Custom
Header/Exhaust: Pacesetter from
Detail Work: Painted block with powdercoated accessories
Misc.: CNC master cylinders, all wiring has been routed through two connectors on the firewall, motor was dropped 2.5 inches
Performed By: Owner
Photo 10/10   |   1996 Chevy S10 lines
Special Thanks From Owner:
"Mom, Dad, my brother Mike, my girlfriend Rachel, and my club members in No Regrets for all their support. Also to Jon Locke for letting us use his parents' garage and his help cutting this thing up when we didn't know what we were doin' back in the day. Max Fish, Ernie Macias, Miguel "Wolfman" Eshelman, James "I need sugar" Mendoza, Joshua Threlkeld, Larry Watson for all his inspiration, Bob Grant, the truck driver for runnin' the truck over, Eron Leader for them all-nighters putting it together multiple times, Jason Fry (I'm not sure for what this time, but I think he did something), and anyone else who has helped over the years. It's been so long I can't remember everyone. Thanks!"


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: