Subscribe to the Free

1987 Mazda B2200 - Maz2Low

Clean And Driven-The Winning Formula

Phil Gordon
Dec 1, 2010
Photographers: Phil Gordon
Owner: Cory Richmond
Ride: 1987 Mazda B2200
Hometown: Delray Beach, FL
Photo 2/9   |   1987 Mazda B2200 right Side View
At the age of 16, Cory Richmond's sister was dating a minitruck enthusiast. Young Corey latched onto him and began learning about customizing a mini step by step.
After a couple of years of observing and helping, he bought his sister's boyfriend's truck and began using the techniques he learned to create a mini in his own style. Later on, Cory moved from his hometown of Burlington, Ontario, to the warmer climate of Delray Beach, Florida. After a couple of months in the Florida sun, he began searching for a new mini project. He noticed a stock Mazda sitting at a shop near his house. With ideas already forming in his mind, he inquired about the truck, and after several months the owner finally agreed to let it go for a thousand dollars.
The rebirth of that 1987 Mazda B2200 began when Cory started work on the suspension. After researching several options, he chose a hydraulic suspension based on the height it would give him and the smoothness of the ride he was after. He began by clipping the back-half and building a frame out of 2x3 tubing to hold the new Mazda RX7 independent rearend. Since the Mazda rear was a four-lug, Cory redrilled the front hubs to match, adding a set of 20-inch KMC Tramps loaded with Sumitomo rubber. A Pro Hopper competition hydraulic setup was installed using 10-inch cylinders in front and 6-inch versions in the rear. To achieve maximum lift, the rear cylinders were mounted high up on the control arms. In the front, Cory created tubular upper control arms, and the lower arms were changed to stamped A-arms. The system was given the hard-line treatment so no rubber would be visible. Batteries to power the system reside in a rack hidden away under the bed. The final chassis mod was the gas tank, relocated between the framerails with a new custom gas door.
Photo 3/9   |   1987 Mazda B2200 cory Richmond
Once the suspension was in place, Cory set his aim on the body. The Mazda was brought into his shop and stripped, sandblasted, and had the cab removed, then it was bodydropped 3 1/2 inches to lay rockers. The shaving process included the door handles, gas door, fenders, tailgate, rollpan, and mirrors. Cory chose a Camaro cowl hood, molded in place for an aggressive look, teamed up with Ford Ranger headlights behind a phantom billet grille. An Inalfa electric sunroof transformed the Mazda to an open-air, suntan machine. With the body mods complete, Cory replaced the stock four-banger with a 350 V-8 from a 1975 Camaro. A little extra zoom-zoom came from a new Edelbrock carb and intake. Exhaust flow was expedited thanks to a MagnaFlow package tailored to fit the Mazda. Cory's uncle, Tim Richmond, rebuilt the transmission and added a shift kit to handle the new horsepower. With the horsepower handled, it came time to make some real decisions.
Photo 4/9   |   1987 Mazda B2200 custom Truck Bed
Choosing the proper color for any custom truck is the most critical aspect in any build. Cory pulled the truck into the paint booth and shot his first ever paintjob, using DuPont Cloisonne Blue. The tintable bedliner in the bed and engine bay was painted and cleared to give it a grainy feel. After stepping back and admiring his handiwork, he decided to pull off some more tricks in the interior. The new interior pampers the driver and passenger thanks to the Honda Civic seats featuring cut-down headrests. Pods built into the doors hold JL Audio component sets, while the new center console houses the 10-inch Diamond Audio subwoofers. A B&M shifter rounds out the interior modifications.
Photo 5/9   |   1987 Mazda B2200 left Side View
It all started with observation and learning, but Cory clearly overtook his teacher and created a custom mini that has taken many top awards at shows. He learned that when he puts his mind and heart into something, nothing can stop him. "I always strived to have something that would stand out among the others," Cory tells MT.
It may have taken years, but his creativity and ideas have reached new heights with Maz2Low. Check out the Lowdown for the rest of the details.
The Lowdown
Rolling Attire

Wheels: 20-inch KMC Tramp
Tires: 245/35R20 Sumitomo
Photo 6/9   |   1987 Mazda B2200 sunroof
Chassis Modifications
Suspension: Two-pump hydraulic suspension
Pumps: Pro Hopper Competition
Frame Mods: RX7 independent rearend, rear-clipped, frame built from 2x3-inch tubing
Performed By: Owner
Body Modifications
Shaved: Doors, gas door, cab seams, fenders, full sheetmetal bed, tailgate, rollpan, mirrors, and the firewall was tubbed and shaved
Bodydrop: 3 1/2 inches to lay rockers
Front End: Camaro cowl hood molded to fit, Ford Ranger headlights, phantom billet grille molded to fit
Other Modifications: Inalfa electric sunroof mounted, gas tank relocated between the framerails
Performed By: Owner
Photo 7/9   |   1987 Mazda B2200 tailgate
Brand & Colors: DuPont Dark Cloisonne Blue with high-satin pearl, five coats of DuPont Chroma Clear
Performed By: Owner
Seats: Honda Civic bucket seats with the headrests cut off
Material: Gray tweed with titanium suede inserts
Door Panels: Wrapped in tweed with speaker pods built in
Interior Extras: B&M shifter, Simpson Camlock racing harnesses for quick release
Performed By: Owner and father, Steve Richmond
Photo 8/9   |   1987 Mazda B2200 custom Interior
Head Unit: Pioneer N3 DVD & Navigation
Mids & Highs: JL Audio components and tweeters
Subwoofers: Two 10-inch Diamond Audio subwoofers in center console
Amplifiers: Two old-school Phoenix Gold amps built in custom amp rack
Performed By: Owner
Engine Performance
Engine: Chevy small-block 350
Intake: Edelbrock
Headers: Hedman
Exhaust: MagnaFlow dual exhaust custom-cut to fit
Performed By: David Roland and owner
Photo 9/9   |   1987 Mazda B2200 engine
Special Thanks From Owner
"My mom and dad, Kimberly, Dave, my sister Kristie, and brother-in-law Chris for getting me into minitrucks, my brother Joe, Mike Rap, Tim Richmond, and Nath for selling me the truck based on my ideas and passions, and most of all Mini Truckin' magazine for allowing my creativity and desire to be seen by others."


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: