1970 Toyota Hilux - The Lo Lux

When Shorter and Lower is Better

John Mata Jr.
Jan 1, 2012
Photographers: Johnny O
Owner: Sean Ramage
Ride: 1970 Toyota Hilux
Hometown: Simi Valley, CA
Photo 2/9   |   1970 Toyota Hilux The Lolux front Angle
"I wanted to build a minitruck because everyone tells me that I have little man syndrome," says Sean Ramage of Empire Fabrication in Simi Valley, California. Being an owner of beefy, jacked-up trucks and dogs the size of miniature horses, one could easily come to the conclusion that Sean, who is definitely not the biggest dude on the block, was using these things to make up for his lack of size. He shut those people up real fast with the debut of his chopped and shortened Toyota Hilux.
“I started making money working on rockcrawlers, but I found that there was more to be made with minis,” admits Sean. So, he naturally gravitated to the low side. The first modification made to the Hilux was cutting the bed and trimming down length by 23 inches, then the factory 3-inch rocker was removed and a 1-inch replacement, fabricated from 3/16-inch plate, was put into place. And to get the roof to look proportional to the Toyota’s lower, shorter physique, it was taken down a quarter of an inch at a time until it was perfect. To extend the metalwork involved, the door mirrors, marker lights, wipers and squirters were shaved clean, and front fenders and a valence were molded to the front clip, but due to an accidental drop from a trailer, it is in the middle of reconstruction.
Photo 3/9   |   1970 Toyota Hilux The Lolux rear
This build still has a ways to go, but we just had to share it as it currently sits for the simple fact that it’s cool as hell! A new frame is also being constructed, but for now, the modified stock chassis will have to do.
The Lowdown

Rolling Attire
Wheels: Stock 14s with custom-painted caps
Tires: Original four-ply

Chassis Modifications
Suspension (front): Modified stock
Suspension (rear): TIG-welded three-link
Control Arms: Stock
Air/hydro Accessories: Slam Specialties ’bags
Frame Mods: Shortened to fit under body
Performed By: Empire Fabrications
Photo 4/9   |   1970 Toyota Hilux The Lolux rear Angle
Body Modifications
Shaved: Doors, mirrors, cab vent, emblem holes, side markers, tailgate marker, gas door, hood squirters, windshield wipers, all body seams, rain gutter, lower front valence
Bodydrop: 4 inches
Body Mods: Shortened bed 23 inches, chopped top 1 1/2 inches, custom 1-inch rocker
Bolt-ons: Custom-machined badges to match stock badges
Misc.: Front fenders molded to front core support
Performed By: Empire Fabrications

Brand & Colors: Factory
Misc.: Custom sand job
Performed By: Empire Fabrications

Seats: Stock bench
Dash: Shaved stereo and ashtray in center section of dash
Gauges: Stock
Performed By: Empire Fabrications
Photo 5/9   |   1970 Toyota Hilux The Lolux front
Engine: 3T-GTE
Boost: 7 lbs
Rearend Type: Stock
Performed By: JDM

Special Thanks From Owner
"I would like to thank my loving wife for being patient while I worked long nights, Mike Romero and Nick Miserendino for help on the metalwork, and the Mohr family for the truck and the three years I lived with them during which I learned how to fabricate."
Photo 6/9   |   1970 Toyota Hilux The Lolux twin Cam Turbo



Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: