Subscribe to the Free

1995 Nissan Hardbody - The Asphalt Assassin

Back With A Sniper’s Precision

John Mata Jr.
Feb 1, 2012
Photographers: Brandon Burrell
This isn't Joe Hughes' first rodeo with his Nissan. His truck was shot and featured back in '08, but not for a cover. A fateful accident in the same year at Slammin' and Jammin' forced Joe back into the garage for a major repair/overhaul, but he swore to himself that the next time his truck found its way in front of a camera, it would be for a cover shoot.
Photo 2/11   |   1995 Nissan Hardbody The Asphalt Assassin front Angle
But before a shoot like that could even be a remote possibility, Joe knew that he was going to have to rebuild his truck exponentially better than before. "I learned that it takes a great deal of patience with a complete rebuild. New, fresh ideas were important, and sometimes what I saw in my mind didn't come out too great in reality. That meant I had to start over and get it right the second time around" says Joe about the rebirth of his killing machine. The Caddy tails and ragtop ended up in the dumpster, and the fresh ideas Joe mentioned above came in the form of a completely reworked and detailed bed, engine compartment, and interior. Sure, all the extra work to produce the desired results Joe had envisioned would require lots of time and money, but to him those were minor obstacles on his way to the cover.
It wasn't the new modifications that proved to be the biggest challenges along the way as much as the revisiting and deleting of prior work turned out to be. "The metal on the tailgate and taillight area was so thin that it was impossible to weld anything to it. Four inches of the bedsides had to be cut off, and four inches of another bed had to be attached to give us the necessary support for the Cali combo and taillight fillers."
Photo 3/11   |   1995 Nissan Hardbody The Asphalt Assassin open Roof
But Joe wasn't the only one affected by the rebirth of his feature truck. "A friend of mine who helped put the motor back spent so much time in the shop with me that I had to show his wife photos of the progress we were making on the engine bay to prove to her that he wasn't screwing around on her." Things like this made Joe and his buddies laugh and forget about the stress involved with getting the truck ready for its first public debut, which was sometimes enough to drive them crazy.
With the Asphalt Assassin back together and looking meaner than ever, Joe couldn't help but step back and share with us the real reason why he is even messing around with trucks to begin with. "I've been into minitrucks since I was 10. I'd watch my older brother Jay work on his '88 Nissan in the driveway. When he passed away in '94, he left me with his truck and a deeply rooted passion for this lifestyle as a whole."
Photo 4/11   |   1995 Nissan Hardbody The Asphalt Assassin seat
There is no questioning a man's motivation when the results of his labor look as good as Joe's. And when the major source of opposition just happens to be your past self and capabilities, that's when you know you have the mentality of an assassin.
Owner: Joe Hughes
Ride: 1995 Nissan Hardbody
Hometown: Mount Sterling, KY

Photo 8/11   |   1995 Nissan Hardbody The Asphalt Assassin rear View
The Lowdown

Rolling Attire
Wheels: 20-inch Starr Wheels 958 Dominator
Tires: 225/30/20 Nankang

Chassis Modifications
Suspension (front): Air Lift Dominator 2500 'bags, Belltech spindles
Suspension (rear): Air Lift Dominator 2600 'bags
Control Arms: Custom
Shocks: Monroe
Compressor(s): Engine-driven and a Viair 480 as back-up
Air/hydro Accessories: 8-1/2-inch GC Extreme valves
Frame Mods: Rear frame doubles as air tank
Brakes: Rear disc conversion
Misc.: Summit Racing 10-gallon fuel cell
Performed By: Owner, Paul Rogers
Photo 9/11   |   1995 Nissan Hardbody The Asphalt Assassin starr Wheels
Body Modifications
Shaved: Door handles, antenna, tailgate, emblems, mirrors
Bodydrop: 4 1/2 inches
Body Mods: Custom-molded front end, full sheetmetal rear, glass roof
Performed By: Owner, Paul Rogers, Ronnie Parrish, Aaron Muncie

Brand & Colors: DuPont Starburst Blue and Bright White
Misc.: Silver airbrush trim
Performed By: Ronnie Parrish, graphic design by Lil’ Jack
Seats: White vinyl with blue inserts with custom-stitched pleats
Dash: 'Glassed and painted
Misc.: Door panels fitted with Audiobahn amps, hand-built center console, shifter routed through passenger side of console
Performed By: Owner, Vaughn Kelly, Ronnie Parrish, Paul Rogers

Head Unit: Jensen touch-screen
Mids & Highs: Pioneer 6-1/2-inch in doors and console
Subwoofers: Four 10-inch Audiobahn flame series
Amplifiers: Audiobahn
Misc.: One-off enclosure, hardlined subs (no wires)
Performed By: Owner, Leslie Hughes, Aaron Muncie, Tim Taylor
Photo 10/11   |   1995 Nissan Hardbody The Asphalt Assassin interior
Engine: Stock 4-banger
Intake: Nissan 240 SX
Header/exhaust: Custom
Transmission: Auto fully smoothed and painted
Rearend Type: Toyota
Detail Work: Engine was pulled and painted, powdercoated brackets, valve cover and intake
Misc.: Optima cells under bed, one-off fenders
Performed By: Owner, Paul Rogers, Aaron Muncie, Specktacular pinstriping

Special Thanks From Owner
"Thanks to my wife, Leslie, Paul Rogers, Ronnie Parrish, Lil’ Jack, Aaron Muncie, Tim Taylor, Larry Hatfield, Gilbert King, and my brother Jay who was motivating me through the entire process. I’m waiting for the day when my brother and I will be draggin’ the asphalt together."
Photo 11/11   |   1995 Nissan Hardbody The Asphalt Assassin engine Bay


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: