Subscribe to the Free

Hollow Point - 2008 Ford F-650

This F-650 is at the Top of Darth Vader's Christmas List

Harley Camilleri
Jul 1, 2012
Photographers: Harley Camilleri, Maxwell Matthewson
Photo 2/8   |   The 8-foot longbed, stock taillights, and paint-matched rear bumper all appear as if Ford built the truck this way from the factory. Nothing could be father from the truth, as the F-650's frame was cut down 15 feet to accommodate the factory look. As if that weren't enough, the frame is also sporting a 16-inch notch to clear the rear axle and Goodyear air suspension.
It would seem that there isn't much real estate available to bring anything new into the world of custom trucks. Lifted and lowered trucks are not exactly some new phenomena, so how does one stand out in a crowd of very similar appearances? The fastest way to get the proper attention is to find that diamond in the rough; something that was overlooked or considered to be just too darn difficult to accomplish. We believe this F-650 does all of that and then some.
Built by Adam Genei and the Mobsteel crew in Brighton, Michigan, the huge Ford would seem slightly askew when delving into the company's previous custom vehicles. All outward appearances point to an affinity for classic Lincoln Continentals made of solid steel and every one dressed in a healthy coating of black. Adam tells us, "The cars we build are a part of American history; vintage Detroit steel, not a fiberglass reproduction. Steel with a soul, and the blood, sweat, and tears of our friends and family." After speaking with Adam at length, it becomes very clear he has a deep passion for the custom industry and his company's work shows that conviction. So how does the Hollow Point F-650 even make the cut? Basically, Mobsteel's customers drive more than just classy Lincoln Continentals and want their other vehicles to reflect a similar style.
Photo 3/8   |   2008 Ford F650 front Grille
One of the many high-profile clients having purchased a number of custom rides from Adam is NFL All-Pro, Albert Haynesworth. Apparently, Albert believes so highly of the work coming out of the Brighton shop that this truck was built entirely on a phone call alone. If that isn't saying something positive about Mobsteel, then we don't know what would. In the course of only a few minutes, Albert expressed his desire for something different and suiting of his personality. Adam responded with the F-650 and ideas to make it big, bad, and black. With the talking part handled and freedom to run, Adam secured an '08 Ford F-650 cab and chassis, and the reality of a plus-sized project was underway.
Photo 4/8   |   2008 Ford F650 rear Angle
First on the list was getting the frame handled. It was determined that many feet of frame were going to see the cutting room floor before the standard Ford 8-foot longbed could properly fit. The frame was lopped off an amazing 15 feet and a matching '08 factory bumper was installed making the rear end appear as if the Blue Oval rolled off the assembly line itself. Suspension was handled by cutting off nearly every suspension mount, both front and rear, before relocating and fabricating new mounts to allow the truck to not only sit lower, but actually function properly and maintain the trucks GVWR. A custom front beam axle was built in house at Mobsteel and features an additional 3 inches of lowering compared to the stocker. Goodyear commercial airbags lay the medium-duty rig down over 325/45R24 Pirelli Scorpion ATR rubber and custom 24x10-inch Aztec wheels. All told, when the air is released from the F-650, its roofline measures 28 inches lower than when the project began thanks to the air suspension and 5½-inch lowered body.
Photo 5/8   |   Inward appearances stayed mostly as originally equipped with a few exceptions. All four bucket seats received handtooled leather inserts, and an aluminum overhead console swings a couple 17-inch widescreen monitors into view. What aren’t immediately noticeable are the one-off Glock pistol holsters in each front door with a dual-magazine holder on the center console.
Photo 6/8   |   2008 Ford F650 mobsteel Badge
Tilting the custom grille and hood forward over the handcrafted steel bumper reveals a massive Caterpillar inline-six turbodiesel. Governed for low speed work, Michigan Caterpillar in Novi, Michigan, reprogrammed the ECM to allow the truck a little more freedom to run. Breathing through a 6-inch turbo-back exhaust, the 11,950-pound truck can now run to 110 mph. Flying down the roadway from the command center, driver and passengers alike will be sitting comfortably in quad bucket seats stitched in two-tone, handtooled black and tan leather by No Joke Custom Upholstery in New Carlisle, Ohio. A suede and aluminum overhead console holds two 17-inch widescreen monitors, and filling those monitors is an audio video system piled high with JL Audio component speakers and amplifiers controlled by a Pioneer DVD head with an iPod docking station.
According to Adam, the truck was just supposed to tow a trailer to the '11 SEMA show and was never supposed to be in the Ford booth. Once the Blue Oval designers saw the smoothed and slightly shaved big rig coated in PPG Mobsteel Black, they had to have it inside for all the show attendees to gawk at. It was no surprise to us as the guys have built a reputation with Ford after having already built a turbo Taurus SHO, Ford Flex, and a turbo V-6 Mustang. All were appropriately dressed in PPG Mobsteel Black, of course. What was a surprise to Adam was the truck receiving a Ford Design Award, Mobsteel's fifth such award. "It's surreal to be getting this kind of attention from the industry. We just do what we like and try to have fun doing it," he explained. With an eye for design and classic lines plus the backing of company's like Ford, JL Audio, Miller Welders, PPG, Pirelli Tire, Dynamat, SATA, and Sauvé Media Marketing, it would seem surreal not to succeed.
Photo 7/8   |   The JL Audio amps are mounted in a TIG-welded aluminum V-shaped structure with speed holes to show off Mobsteel’s creativity and craftsmanship.

"The cars we build are a part of American history…Detroit steel." -Adam Genei

Inside the Build
Year Make Model:
2008 Ford F-650
Albert Haynesworth
Photo 8/8   |   2008 Ford F650 front Angle
Type: 7.2L turbo I-6 Caterpillar
Exhaust: 6-inch turbo-back

Engine Management: Michigan Caterpillar custom tune
Output: 380 hp and 1,060 lb-ft
Built by: Mobsteel
Front suspension: Custom front mounts, one-off axle, Goodyear industrial airbags
Rear suspension: Custom rear setup with 16-inch C-notch, shortened frame, Goodyear industrial airbags
Brakes: Factory F-650
Wheels & Tires:
Wheels: 24x10 Aztec
Tires: 325/45R24 Pirelli Scorpion ATR



Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: