Subscribe to the Free

2004 Chevy Silverado 1500 - Showing Off

An Owner Who Isn’t Afraid to Beat on His Show Truck

Maxwell Matthewson
Jun 19, 2013
Photographers: Team Truckin
Photo 2/6   |   showing Off 2004 Chevy Silverado 1500 feature Photo
Two years ago we held our first east coast THROWDOWN at Holley's LS Fest. We had heard of the LS Fest event but hadn't been and weren't sure who we could get to come beat on their trucks. Of the entrants, we had a lot of the same old beater trucks that guys added nitrous to. However, one of the contestants surprised us with his truck. It was a 'bagged regular-cab shortbed 2004 Silverado with custom paint and interior, and 22- and 24-inch Billet Smoothie wheels. The owner, Jason Logan of Falmouth, Kentucky, had never taken his 5.3L-equipped Bow Tie onto any racetrack. We were glad to see someone that was tired of sitting under an E-Z UP and drinking beers. He would rather see exactly what his truck could do. When the tire smoke had cleared, Jason was toward the back of the pack but had a smile ear-to-ear.
Obviously, Jason's truck didn't start out looking this cool. Working in a paint and body shop, he wanted a killer project on which he could showcase his skills. He started by tearing into the factory suspension. Ride Tech control arms and Slam Specialties RE-7 'bags bring the front end down, while a KP Components cantilevered four-link with a Watt's link brings the rear down to match. Before the rear was put back together, Jason had the axlehousing narrowed and Moser axles installed, as well as Richmond 4.10 gears. For added sway control, a Ride Tech Muscle Bar sway bar was bolted on up front. To this suspension, Jason added a set of 22-inch and 24-inch Centerline Smoothie wheels shod in Kumho rubber, size 265/35R22 and 305/35R24.
Next, Jason focused on the body. Since this is his area of expertise, he wanted to make it look awesome, but still be fairly simple. He achieved this by shaving the doors and tailgate and installing a roll pan out back. Jason then sprayed a base of Galaxy Silver and laid down hot rod-inspired flames before spraying a topcoat of Victory Red, both of which are factory colors. The negative flames look perfect and flow smoothly all the way to the rear of the bed. Before putting his spray gun away, Jason added color to several of the plastic pieces under the hood as well as the plastics from the interior.
Happy with the look of his truck, Jason wanted some more power out of it. This came by way of a Vararam intake with a nitrous spray plate and 150hp jets, Pacesetter headers, and a Magnaflow 3-inch exhaust. Keeping the 5.3L running cool is a pair of Perma Cool electric fans. To handle the extra power from the engine mods, Jason had a 4L60E custom-built and installed it with a Yank 3,200-stall convertor.
Moving inside, Jason had a sub box built to house four 12-inch MTX Audio Thunder 9500 subs. The seats are covered in gray leather with red stitching. Finishing off the interior, a BAD steering wheel was bolted to the steering column.
Photo 3/6   |   showing Off 2004 Chevy Silverado 1500 interior
Jason said that he had a blast beating on his truck at THROWDOWN, even though he busted two U-joints and bent a link bar three times. When asked if there was anyone he wanted to thank, he was quick to say his girlfriend Bonnie, Darren Jones, Josh Smith, Robert White, Mason Ohara, Logan Ohara, Scott Jones, Stan Horton, Shaun Delaney, Brandon Bowling, Brandon Ogden, Jarrod Lucas, and Chris Cummins for all of their help on the build.
Inside the Build

2004 Chevy Silverado 1500

Owner and City/State:
Jason Logan • Falmouth, Kentucky

Type: 5.3L LS
Heads: Stock
Cam: Stock
Induction: Vararam box and cold-air intake, Nitro Dave’s spray plate with Nitrous Express 150 hp jets and 15-pound bottle Exhaust: Pace Setter ceramic-coated long-tube headers, Magnaflow stainless 3-inch exhaust
Cooling: 160-degree thermostat, Perma Cool electric fans
Fuel System: Stock
Ignition: Granatelli plug wires
Engine Management: Factory computer with custom tune

Transmission: Custom-built 4L60E with Yank 3,200-stall converter
Rearend: GM 8.5-inch narrowed 5½ inches, Moser axles, and Richmond 4.10 gears with stock limited-slip

Front suspension: Ride Tech control arms, Muscle Bar sway bar, and Slam Specialties RE-7 ’bags Rear suspension: KP Components cantilevered four-link with Watt’s link, Slam Specialties RE-7 ’bags
Brakes: Stock

Wheels & Tires
Wheels: Front 22x9½-inch Centerline Smoothie, Rear 24x10-inch Centerline Smoothie
Tires: Front 265/35R22 Kumho, Rear 305/35R24 Kumho


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: