The Lowdown
1995 Chevy S-10
Mike Rovansek • Mentor, OH • East Side Lower Level

20x8.5 KMC Nova (front) / 20x10 (rear) with 245/35/20 (front) / 275/35/20 (rear) Nitto NT55 tires

Stock S-10 front clip from firewall forward with Belltech 2-inch drop spindles, handmade radiused wishbone with super pivot, 'bags on lower 2x2 bars, Ride Tech control arms shortened 5/8-inch, Air Lift Dominator 2500 and 2600 'bags, dual Viair 380 compressors

Body Modifications
Shaved roof seams, stock-floor bodydropped, crew cab made from front half of a four-door Blazer (after B-pillar) and back wall of a standard cab S-10, Grand National hood bubble, custom DOT tempered rear door glass

LT Tahoe Blazer front buckets, S-10 front bench for rear seats, stock LT Tahoe Blazer dash and gauge cluster, Grand National center console, shifter, steering wheel

'87 Buick Regal Grand National 3.8L SFI turbo intercooled V-6, modified stock headers, custom crossover pipe and 2.5-inch exhaust from turbo to back, Grand National 10-bolt 8.5-inch posi shortened 6 inches with custom Moser axles and 373 gears, handmade chrome intake, Grand National 3-core radiator, extended cab drive shaft lengthened 18 inches, handmade 15.4-gallon Fatties Chassis fuel cell

Special Thanks From Owner
"Huge thanks to Matt Sabo of Fatties Chassis—without his knowledge and help, this truck would never exist, my brother Nick Rovansek (Co-owner of Ground Pounders Customs) for the stealth wiring, Jim Maneri for the custom lines and Grand National/S-10 hybrid wiring harness and input, John Reynolds, our very helpful unpaid apprentice who dedicated a ton of time to the build, and my dad for all the running around and painting, and a tremendous thanks goes to my wife Melanie. Without her patience and understanding over a 2½-year period, I wouldn't have had the opportunity to team up with these guys to create this truck."