• |
  • |
  • 1998 Chevrolet Tahoe - Rolling Deep - Busted Knuckles

1998 Chevrolet Tahoe - Rolling Deep - Busted Knuckles

This 1998 Tahoe Tucks Massive 24x15-Inch Billets

Patrick McCarthy
Oct 15, 2013
Photographers: Patrick McCarthy
We've always said that if something is worth doing, it's worth overdoing. You could build a truck that's simply low, or you could build a truck that is absolutely slammed. You could build a sound system that's loud, or you could build one that vibrates fillings loose. Or, in this case, you could roll on big billets, or you could tuck absolutely massive 24x15-inch ones. For Evan Pagourtzis of Houston, going to the extreme was an obvious choice. With that philosophy in mind, he picked up a '98 Chevy Tahoe and got down to business.
Since Evan knew he wanted his Tahoe to have a stunning stance, he and his friend David began building a new custom frame using 2x3-inch steel tubing. Once complete, a quartet of Slam Specialties 'bags was bolted on, 2600s in the front and 2800s out back. Dual Viair compressors supply the 'bags with air, and a custom two-link stabilizes the rearend. To make room for the enormous new wheels, the rear axle was narrowed a whopping 19½ inches. Finally, the 24x9½ and 24x15-inch Intro Vista II billets could be wrapped in fresh Pirelli rubber and installed.
Photo 2/5   |   1998 Chevrolet Tahoe
Standing back and observing his handiwork, Evan was pleased with the results but knew it needed a little more to be presentable. First, a 4-inch cowl hood, shaved front bumper, rear roll pan, and black projector headlights were added for custom flair. Evan then sprayed the truck with a fresh coat of matte blue paint, nicely offsetting the polished wheel lips. Under the Tahoe's hood resides a rebuilt 355ci V-8, complete with a Holley 650-cfm carb, RV cam, Edelbrock intake, and custom 3-inch exhaust. The truck's interior is still incomplete at this stage, with a simple vinyl-wrapped dash and sheetmetal bridge over the rear suspension components.
Over the course of the last year and a half, Evan turned this once-stock Tahoe into a killer custom. Although it has a long way to go before it's complete, it still snaps necks everywhere it goes, and that's certainly something to be proud of. Evan would like to thank Cloverleaf Customs, David Minx, his NRastra family, and his wife Amanda for their help and support.
Inside the Build
Year Make Model:
1998 Chevrolet Tahoe
Owner and City/State:
Evan Pagourtzis • Houston, Texas
Type: 355ci V-8
Heads: Ported and polished
Cam: Chevrolet RV-spec
Induction: Edelbrock intake manifold and air cleaner
Exhaust: Custom 3-inch with Flowmaster mufflers
Fuel System: Holley 650-cfm carburetor
Ignition: MSD distributor, coil, and plug wires, Optima battery
Built by: Larry Barnes
Transmission: 700-R4 automatic
Rearend: Axle narrowed 19½ inches, driveshaft shortened 1½ inches, 3.73 gears
Front suspension: Custom 2x3-inch steel tube frame, Slam Specialties 2600 'bags, dual Viair compressors
Rear suspension: Slam Specialties 2800 'bags, custom two-link
Brakes: Braided stainless lines
Wheels & Tires
Wheels: Intro Vista II, 24x9½-inch front and 24x15-inch rear
Tires: Pirelli P-Zero Nero, 275/25R24 front and 405/25R24 rear



Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: