• |
  • |
  • Chevrolet S-10 - Do-It Yourself Rendering

Chevrolet S-10 - Do-It Yourself Rendering

All You Need Is A Pen, Some Colored Pencils, And Access To A Copier

Calin Head
Jan 1, 2008
Photographers: Calin Head
Photo 2/12   |   Here are all of the tools, minus the copy machine you will need to render a truck. The most important item for this procedure will be the proper ink pen. You'll need to find a pen that will soak into the paper like the Sharpie we used; a regular ball-point pen just won't cut it.
In this custom world we live in, one thing holds truer than anything else: Everything costs money. For example, take renderings; while most of us can turn a wrench and dream up ideas, only a select few can actually turn that idea into a picture. No matter if it's hand-drawn or computer-generated, it will take a lot of talent and maybe a high-priced program to produce something worth showing off. In this article, we are going to show the low-tech way to create a rendering.
If you can trace a picture and color inside the lines, then you have enough skill to make your own rendering. The one thing you will need that most people don't own is a photocopy machine. If you happen to have one at your job, then make your copies there, but just make sure your boss isn't watching you. If you work in a place without a copier, you might have to take a trip to a copy center or your local post office. Both of these places will have a pay-per-copy machine that you can use for a small fee. We hope these simple steps will help you get your visions on paper and one step closer to finishing your ride.
Photo 3/12   |   chevrolet S10 Rendering truck Photo
Part One: Trace It!
Part one involves you either taking a picture of your truck or finding one online like we did. Once you have a picture, you can start the tracing, but this will eventually mirror the image (you'll see why in a few moments). We used the basic photo-editing software (Microsoft Photo Editor) that came with our computer to mirror the image before we printed it.

Part Two: Lower It!
If you want to lower the truck more than what is in your picture, that will be easy. While you are at the copy place, make just two copies of your tracing. Take one and cut along the bottom of the truck, removing the ground and the wheels. Now all you have to do is place it over your second copy, slide it down where you want it, and tape them together. Make a copy of that, instead of the stock image, and you will be nice and low.
Color It And Put It On The 'Fridge!
Once you have made those copies, it's time to color. Here are two quick ideas we came up with for this little 'Dime. The flames are a pretty standard and will look good, but that will cost us when it comes time to paint. We are looking for a simpler theme with this truck, and a military-olive-drab green will be a cheaper solution than any multicolor graphics.


7th Floor Copy Machine



Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: