1985 Chevy C10- Hellfire

A C10 Passion Goes Up in Flames

Phil Gordon
Jun 27, 2018
Photographers: Phil Gordon
In 1960, Chevrolet introduced the pickup into the modern era with the C/K and C10 models. The most common was the C10, a ½-ton truck with a 6.5- or 8-foot cargo box. The C10 was completely new and boasted a better weight distribution via increased load capacity of the front axle, which made the Chevy more durable and efficient. For 1973, during the third generation of the C10, GM introduced an all-new, clean-sheet redesign that ran through the ’87 model.
Photo 2/16   |   1985 C10 Hellfire Rear
Chris Mendel of Metairie, Louisiana, developed a passion for the Chevy C10 at just 12 years old. “I remember going to truck shows with my dad,” Chris tells Truckin. “It was the square-body C10 truck that always stood out to me.” Although he didn’t have the funds to purchase his first Chevy C10 until he turned 30, Chris quickly made up for it by developing a stable of seven C10s ranging from ’70 to ’85 models.
Chris had an ’84 and an ’85 Chevy C10 stored in a rented garage when the power unexpectedly went out. Once the power came on, the garage door motors kept running and caused a fire to start. Both of his trucks were burned to the ground. At this point, Chris decided he wanted to purchase another ’85 model, so he began his search.
Photo 3/16   |   1985 C10 Hellfire Engine
Chris’ good friend Jeff Andrews was in the process of building an ’85 when Chris made a purchase offer. It wasn’t an easy thing for Jeff to part with, but Chris ended up with the classic ’85. Jeff had done all the heavy work, including adding a superbright DuPont Viper Red paint and custom air-ride suspension.
Photo 4/16   |   1985 C10 Hellfire Interior
Once Chris took possession, he decided to upgrade the motor. The 350 was built and installed in the Chevy, and polished stainless steel nuts and bolts were replaced in every spot. Chris added a set of Intro Vista wheels to give it a more custom look, stepping out from the original feel.
Photo 5/16   |   1985 C10 Hellfire Wheel
Photo 6/16   |   1985 C10 Hellfire Suspension
Chris wishes to thank his good friend Jeff Andrews for his perfection of the original build as well as good friend Keith Fox from whom he purchased his very first C10. A special thanks goes to Chris’ father, Elroy, for all the love, support, and influence he instilled in him.

Inside the Build

Year/Make/Model: ’85 Chevy C10
Owner and City/State: Chris Mendel; Metairie, Louisiana
Chassis:
Front Suspension: Thorbecke Brothers tubular upper and lower control arms, 2-inch spindles, RideTech airbags
Rear Suspension: RideTech airbags, leaf overs, RideTech Cool Ride compressor, 5-gallon air tank
Drivetrain:
Engine: 350, 600 Edelbrock carburetor, MSD ignition, polished Walker radiator, Sanderson headers, polished stainless steel nuts and bolts
Transmission: 700R
Rearend: 373 gears, narrowed 2 inches
Body/Paint: DuPont white basecoat, DuPont Viper Red paint, smoothed firewall, smoothed sheetmetal under hood, smoothed inner fenderwells, polished stainless steel bolts, Suburban front grille, solid oak wood bed and stainless strips
Interior: Custom leather interior, Dakota Digital gauges, billet inserts, Billet steering wheel, custom gauges in ashtray
Stereo: iPhone connections, Kicker components, Kicker amplifier
Wheels & Tires:
Wheels: 22x8.5, 22x10; Intro Vista
Tires: 265/35R22, 285/35R22; Nitto

POPULAR TRUCKS

MOST POPULAR

Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend
Magazine

PRINT DIGITAL
Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power
Magazine

PRINT DIGITAL
Subscribe Truckin Magazine

Subscribe to:

Truckin
Magazine

PRINT DIGITAL
SUBSCRIBE TO A MAGAZINE
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS