New V-8 drives vehicle-wide enhancements
HUMMER H3 and GM Performance Division engineers did more than simply shoehorn a V-8 engine into the H3's engine compartment. Accommodating the new power plant necessitated the execution of a seemingly endless number of technical details - many of which have been implemented across the entire H3 lineup.
The H3's frame was modified to accept the V-8 engine, and a special oil pan was designed to ensure constant oil pressure when driving on steep grades - a hallmark of HUMMER's off-road capability. Also, the engine compartment front of dash was modified to accommodate the V-8, and a new steering system is used on all H3 models to deliver better on-center feel and even more improved off-road reliability.
To support the torque output of the powerful V-8, the H3 Alpha's front differential case is made of cast iron; other models feature an aluminum case. New engine mounts, higher torsion bar rates to support the increased mass, and specific shock valving also are unique to the V-8-powered model, ensuring it continues to deliver the unparalleled ride quality - both on- and off-road - that customers expect.
All of the chassis and suspension changes were validated in real-world testing on off-road trails in Moab, Utah, the Rubicon Trail and other challenging off-road venues.
"Our engineers live, breathe and eat off-road driving," said Walsh. "To say they sweat the details is an understatement."
A HUMMER by any measure
All H3 models pack HUMMER's trademark capability into a midsize package. Compared to the H2, the H3 is 16.9 inches (429 mm) shorter in length, six inches (152 mm) shorter in height and 6.5 inches (165 mm) narrower. Roughly the same length as a midsize family sedan, H3 comfortably navigates city traffic and fits nicely in parking garages.
The H3 lineup also delivers exceptional rock crawling and climbing performance; it was engineered for off-road leadership among midsize SUVs. The heart of this capability is its electronically controlled four-wheel-drive system and suspension tuning tailored for off-road performance. In addition, the H3 features standard underbody shielding, brake traction control, and an optional 4.03:1 transfer case with rear locking differential.
Among its off-road credentials, the H3 can ford 24-inch (610 mm) streams at a 5-mph pace, climb 16-inch (407 mm) vertical steps and rocks, make its way through deep sand and race easily over sandy surfaces.
H3's more maneuverable size provides advantages, such as a 37-foot turning circle that is about the same as a typical compact car, making easy work of parking lot maneuvers and tight turns when off-roading. The 9.1-inch (231 mm) ground clearance and maximum breakover angle of 25 degrees (with 33-inch tires) both make it possible to clear large obstacles in off-road driving. Serious off-road performance is also aided by the maximum approach angle of 39 degrees and maximum departure angle of 37 degrees. These approach and departure angles permit the H3 to drive into a hole and back out again, without getting hung up in the front or rear.
The H3 is sold in 34 countries, with production in the United States and South Africa .