Subscribe to the Free

Letters To The Editor - Paper Cuts - July 2004

Questions, Answers, Letters, Information

Jul 1, 2004
Protecting Our Freedom
Dear MT Staff,

First off, I want to thank you guys for keeping it real with the magazine and always keeping it interesting and up-to-date for readers all over the world. I also want to thank you for supporting the troops in Iraq, and for giving us mini-truckers the motivation to get home and start a new project. Your magazine gives us the hope and motivation we need, and gives us another reminder of what we are fighting for.
Spc. Luis D. Cruz

We will always stand behind our troops 110 percent, especially in times of war. It really makes us proud here at the office to know that we have troops such as you out there protecting our freedom. When you get back and get going on your next project, send us some pictures and keep us updated. Thank all those in the 1st Brigade, 1st Infantry Division, and all the troops deployed around the world.
Lowering a P'up
Dear MT,

Here's a question I hope you can answer. Is there anyway to lower an Isuzu p'up? I have an '86 p'up and I can't find anything for it. I hope you can help.
via e-mail
Your problem is pretty widespread when it comes to finding parts or kits for older import mini-trucks. Since you weren't specific as to how low you want to go, we would obviously recommend airbagging to slam it on the ground. Many companies offer all the necessary components. FBI [(877) 324-6464] offers full air-ride kits with everything you would need, and Suicide Doors [(812) 782-3581] offers torsion-bar bracketry, or anything else for the 'bag setup. If you aren't planning on 'bagging it, then the lowering is going to be limited to cranking down the torsion bars and lowering blocks in the rear, or a complete custom suspension setup.
Unique S-10
Dear Mini Truckin',

I just purchased a '98 S-dime and want to really trick it out, but many people have them in the custom scene. Do you have any advice on how to make mine unique? I'm open to any suggestions on modifications. Any help is greatly appreciated.
via e-mail
Hey Daniel,
The purpose of customizing a mini-truck is to make it your own. Yes, you'll get ideas from other people along the way by seeing what they've done. Yes, even your friends will have suggestions about modifications you should make. Ultimately, though, your mini should represent what your idea of the perfect S-10 is and not what someone else thinks. In the end, you'll thank us for not telling the whole world some super-cool ideas and have 1,000 S-10s pop up looking the same. We can give you the basic formula of what our pastime has evolved into, but you can see that in all the feature trucks here in the mag. After slamming your truck by 'bagging it and maybe even body-dropping it on some nice rims with a smooth, clean paintjob, the individuality really begins to shine through. Go nuts on your truck and pay attention to every little detail, and we're sure your truck will stand out.
Photo 2/3   |   paper Cuts custom Mini
Livin' On The Edge
Dear MT,

I love your magazine; it has been so helpful in completing modifications to my truck. I have a '97 Ford Ranger and would like to do a face swap. I want to put the '02 Edge front end on, just like the '94 in the Feb. '04 Construction Zone. Do you guys know where I can get the parts, or someone who sells a kit to do the swap? Any information will help because I haven't been able to find the parts.
Jody B.
Douglassville, Georgia
Hey Jody,
Well, we did a lot of checking around for you, and it turns out that generally these are dealer parts. You will need to swap out your fenders forward, meaning the radiator core support, grille, bumper, headlights, fenders, and so on. We found a company that has these parts much cheaper than the dealer, and the guys there are very helpful with answering questions. Call Empire Collision at (909) 387-0771, and it should be able to get you up and running.
Need A/C
Dear MT,

I just bought a bare-bones '92 Toyota Pickup. It has a five-speed manual transmission and the engine seems strong, but it has no A/C or power steering. I know most people ditch their A/C units to make room for a body drop, bigger wheels, and so on, but it's hot as hell where I live and I want A/C. Is there a company that makes kits for this application? Can I use stock Toyota parts from the dealer? What do you guys think would be the best and cheapest option to making my mini-truck more comfortable? Any help is much appreciated.
Josh "2 Damn Hot" Serwoski
Hey Josh,
Your problem is not that uncommon. When we go on the hunt for a mini to put under the knife, we don't want to spend extra for any options because that's money better spent on wheels, paint, and so on. However, there are a few options you have to consider. You can swap in parts from a '89-'94 Toyota from the dealer, but that will be pretty pricey. You can look into a stand-alone unit such as the ones from Vintage Air [(800) 862-6658], or you can check out your local junkyards. We called California Mini Truck Dismantlers and it has all the parts for the A/C and power steering. The crew also does the installation there. If you have any questions, call Troy at (909) 622-1381. Stay cool.
Swap-In Buckets
Dear MT,

I have a '94 Ranger and have slammed it as close to the ground as possible without airbagging it. I'm pretty happy with the exterior, but the interior is stock except for a Grant steering wheel. I've been thinking about finding a set of leather Acura EL buckets to swap in. What would I have to do to get them to bolt into my Ranger? Or, do you know of any cool-looking seats that bolt right in? Any information would be helpful. Thanks a lot.
Paul Parnaby
Campbellsville, Ontario, Canada
Hey Paul,
In an effort to answer your question, we called our local mini-truck dismantler for some sound advice. The guys said that as far as a direct bolt-in pair of bucket seats go, about all you're going to find are the same-year buckets in the '93-'97 Rangers or '95-'97 Explorers. The '98-and-newer seats could work, but they sit taller, so you'll have to fish your seatbelt through and possibly modify or extend the belt. If you want to put the Acura seats in, or any other seat you have room for, you'll most likely have to cut the brackets off your current seats and line them up on the new seats. The best way to go about doing this is to measure the brackets with the new seat inside your truck before welding them into place. We're actually working on upgrading the interior of our project Toyota with some buckets and will touch on the bucket-mounting process in an upcoming issue, so be on the lookout.
High or low?
Dear Paper Cuts,

I am currently working on an '88 Ford Ranger extended cab. I've come to a fork in the road and am not sure which path I should take. I was wondering if I should stay with the slammed-mini-truck theme, or if I should raise it to the sky. I have a fullsize 4x4 frame and a 351M at my disposal. I can't decide because I love door-laying minis throwing sparks, but I also like to see the tree-toppers with minis parked underneath them. Any information or suggestions you can give me would be useful and appreciated.
Zachary W. Clark
Sharon, South Carolina
Hey Zach,
All personal opinions aside, you said that you like to see big trucks with minis parked underneath them. It's obvious that you love slammed minis. Regarding your other statement, if you take away the mini parked under the tree-topper, are you still impressed? Thumbing through these pages, you'll definitely see that we're more for the body-dropped Ranger, but this is a matter of personal preference. We're pretty sure that you wrote to us knowing what we would say, and you just needed a little kick in the butt to stay on the right path. Body-drop it or you won't ever forgive yourself. Even the picture you drew on your envelope is of a slammed truck. Good luck.
Photo 3/3   |   paper Cuts low Yota
- OF


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: