Subscribe to the Free

Air Zenith, Advanced Flow Engineering, QA1 - New Products

Feb 28, 2007
Photo 2/2   |   air Zenith Air Pump side View
Blow Hard
Air Zenith has engineered a 200-psi working pressure, 100-percent duty cycle, moisture- and dust-resistant, oil-free fast air pump. This pump takes less than 2 minutes to fill up a 5-gallon air tank from 160 to 200 psi, while an interchangeable piston allows you to replace the ring periodically to prolong life. It comes equipped with a high-performance racing-style air filter, a stainless steel braided air hose with inline check valve, and a one-year manufacturer's warranty.
For more information, contact: Air-Zenith(702) 270-7988,
Get Your Kicks...
Now the graphic guys at Gearhead Planet have captured the very essence of the historic Two-Lane Blacktop and placed it on a quality T-shirt. Gearhead Planet motor clothing is made in the USA and features fade-resistant inks on 100-percent heavyweight cotton shirts.
For more information, contact: Gearhead Planet (626) 334-3467,
Three's Company
aFe offers three cold-air intake systems at three levels of performance and three price points for the '04-and-later Nissan Titan V-8 5.6Ls. The Super Stock induction system incorporates a high-flow washable performance OE replacement filter and a molded intake tube. The Magnum Force Cold Airbox replaces the stock airbox with a covered upsized airbox and an inverted-top cone filter. The Magnum Force Cold Intake System replaces the entire stock intake tract all the way to the throttle body.
For more information, contact: Advanced Flow Engineering (aFe) (951) 493-7100,
Bigger Than a Baby's Arm
CanDo Specialties introduces a new line of custom '84-'94 Toyota tubular upper and lower A-arms. These babies not only look slick as heck on your Toy, but they serve a couple purposes. First off, they allow more clearance up front, so you can get more lift out of the front 'bags. Second, with the way they are built, you can now eliminate the front strut bars. Each A-arm is constructed from TIG-welded DOM tubing and machined shafts for optimum strength. Additional applications for Tacomas, S-10s, Mazdas, and Nissans are also available.
For more information, contact: Cando Specialties Inc.(530) 533-8680,
Get Shafted
Mark Williams' driveshafts are available in either mild steel or aluminum tubing and include Spicer U-joints and a billet steel transmission yoke. Each driveshaft is custom-made to your desired length, using special fixtures to ensure vibration-free operation. The driveshaft and yoke assembly is electronically balanced to the desired operating speeds, using a computer-controlled device that simulates actual conditions.
For more information, contact: William Enterprises (800) 525-1963,
Cover Them Woofers
Speaker Works is now offering speaker enclosures and covers for virtually any custom automotive application. The Custom Billet Subwoofer Grille (shown) was designed and crafted by Speaker Works technicians following a rough sketch provided by the owner. It is whittled from a solid piece of billet aluminum with CNC machines.
For more information, contact: Team Speaker Works (714) 997-9880,
No Scratchy Mitt
California Car Duster Company has taken advantage of micro-fiber technology to develop a mitt that can be used to wash and dust any vehicle. The MicroMitt can absorb 7 to 10 times its weight in water, which provides more suds reducing washing time. When dry and clean, the MicroMitt can be used to dust vehicles. The ultra-soft fibers have angled edges that effectively pull in dust and dirt. After use, the Mitt can be washed and rinsed.
For more information, contact: The Original California Car Duster Co. (818) 998-2300,
Deep Penetration
Free All deep-penetrating oil will spread into rusted or frozen parts, freeing them in seconds with ease. Free All is more than a lubricant because it has special ingredients that actually eat rust all in a silicone-free formula. You can buy it in 12-, 6-, and 2-ounce cans, and the company claims it won't damage painted surfaces.
For more information, contact: Free All Oil (800) 660-6140,
Small Package
QA1 offers a wide range of steel, small body shocks to fit several applications. And, newly introduced are the 70-Series shocks, which are revalveable and rebuildable. These shocks have the same internal components as other shocks from QA1. These steel small body shocks are manufactured in a twin-tube design, so the outer tube can get dented without binding the shock.
For more information, contact: QA1 800) 721-7761,
Stretch Marks
ARP has introduced a new-style Rod Bolt Stretch Gauge as an aid to professional engine builders and serious enthusiasts. The ergonomically designed gauge, with a built-in handle, is designed to facilitate quickly and accurately measure the length of connecting rod bolts. Measuring rod bolt stretch is the most accurate method of determining its preload.
For more information, contact: Automotive Racing Products Inc. (800) 826-3045,
The most overlooked problem when lowering or lifting a truck is driveline angle. The driveline must be adjusted to restore the original angle. Improper angle causes shimmy and will wear out your U-Joints and pinion gear. These aluminum axle shims will solve all your pinion angle woes.
For more information, contact: Aim Ind. (800) 682-8789,
Touch It Already
JP Customs introduces a Factory Touchscreen Navigation Upgrade Package for '03-'05 fullsize Chevy, GMC, Cadillac, and Hummer trucks and SUVs. This package adds the mapping and tracking capabilities of navigation to the factory audio system while retaining the factory look. It will retain all function and control of factory installed options, as well as XM, OnStar, DVD, a six-disc changer, steering wheel controls, and rear audio controls, if equipped. It requires no special programming or adapters. Each Navigation Package comes complete with everything needed for the installation and a 1-year warranty to back it up.
For more information, contact: JP Customs(281) 533-9900,
Make Less Trips to the Box
Face it. You already have too many wrenches. Powerhouse Products can help thin down the herd with a pair of adjustable crescent wrenches that fit any AN fitting from No. 3 through No. 20. These crescent wrenches are made in America, from aluminum, and are compact enough to fit in your pocket.
For more information, contact: Powerhouse Products (800) 872-7223,
- OF


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: