Subscribe to the Free

New Sport Truck Products - April 2006

Calin Head
Apr 1, 2006
Photo 2/14   |   sport Truck Products banks Power
Monster Tubes
The Banks 3-inch stainless steel Monster exhaust for the '05 Nissan Frontier 4.0L is designed to be a direct-fit, bolt-on system that flows 104 percent more than the stock factory exhaust, while reducing backpressure by more than 93 percent. Leveraging the stock hangers, ground straps, and rear balancer, Banks Monster exhaust replaces the crimped 2-1/4- inch stock exhaust with an all-stainless steel mandrel-bent system that uses larger-diameter pipes, optimizing exhaust flow. The entire system is backed with a lifetime warranty and is fully compatible with Nissan's factory warranty.
For more information, contact: GALE BANKS ENGINEERING (877) 455-2303,
Photo 3/14   |   sport Truck Products baer
It Isn't a Doughnut
Put the stops to your '05-and-later 1/2-ton GM pickup with a Baer Claw GT drum-to-disc rear brake conversion. With a 14-inch-diameter rotor, a two-piston aluminum caliper and a drum-in-hat park mechanism, your Silverado can be fitted with an upgrade to the factory brakes without changing the master cylinder.
For more information, contact: BAER INC. (602) 233-1411,
Photo 4/14   |   sport Truck Products audiobahn
Boom, Wickie, Wickie...
The AW1000V features new design elements that intelligently increase the woofer's overall efficiency. Capable of handling 600 watts rms, the AW1000V offers not only power but increased durability in various applications. With an efficiency rating of 91.1 dB, the dual 4-ohm sub also features a new high-gloss cone manufactured from high-strength carbon composite, giving the component a radiant overall look.
For more information, contact: AUDIOBAHN (800) 488-8595,
Photo 5/14   |   sport Truck Products arb Usa
Got a Low Truck?
The X Jack from Air Locker has an 8,800-pound lifting capacity and is only an inch and a half thick, deflated, and blows up to almost 30 inches. With a two-way inflation system, this air jack uses either exhaust from the truck, or a portable air compressor will lift even the lowest rides. And, it works just as well for all you lifted truck owners, too.
For more information, contact: ARB USA (425) 264-1391,
Photo 6/14   |   sport Truck Products design Engineering
Wrap Your Pipes
DEI has just introduced a line of black exhaust wrap of varying lengths and widths to go along with the company's existing line of wrap. Black exhaust wrap is gaining popularity, especially among sport compact owners, or where the engine compartment appearance is just as important as how the interior or exterior look. Black wrap serves as an alternative to the more common "natural" or neutral exhaust wrap color, and black often blends in well with other underhood components. All DEI exhaust wraps can withstand continuous heat as much as 2,000 degrees Fahrenheit and are available in 15-, 50- and 100-foot lengths and either 1- or 2-inch widths.
For more information, contact: DESIGN ENGINEERING INC. (800) 264-9472,
Photo 7/14   |   sport Truck Products go Rhino
Get It Together
Store loose items and enhance your garage, shop, or enclosed trailer with these organizers, offering more than 30 sizes and styles to choose from. Each organizer is made of quality steel and is available in white, silver, or red durable powdercoat finish, made to snap into peg board.
For more information, contact: GO RHINO! PRODUCTS (888) 427-4466,
Photo 8/14   |   sport Truck Products kreepster
I'm a Kreep
The Kreepstool is a lightweight aluminum rolling seat with multiple storage compartments. Configured with stability in mind, high-tech products were used to build this garage seat, featuring six locking urethane casters for smooth travel when rolling over cracks and obstacles.
For more information, contact: 4TEK (866) 996-3918,
Photo 9/14   |   sport Truck Products go Smitty
Sit On It
Smittybilt, maker of pushbars and grilleguards, has shifted its focus to the interior with the company's new custom replacement sport seating. Built to fit in S-10 and Ranger pickups, the complete replacement kits include brackets, two seats, and a center console. The seats are covered in vinyl with many color options and feature full reclining backrests and high bolsters to prevent you from sliding across the truck.
For more information, contact: SMITTYBILT AUTOMOTIVE (888) 717-5797,
Lo-Pro Plastic Fantastic
Custom-designed and manufactured for the Toyota Tacoma to provide a streamlined appearance, the Lo Pro II plastic tonneau cover incorporates ARE's scissor-hinge technology for smooth operation, and water management system that channels water away from the bed. The Lo Pro II also offers a unique "slam" latch configuration for security and is completely bolt-on.
For more information, contact: A.R.E (800) 649-4273,
Photo 12/14   |   sport Truck Products sts Performance
2.0 Liters of Power
STS Performance is now offering a custom cam grind and 1.6 ratio roller rockers for all '94-'03 2.2L four-cylinder S-series trucks, such as the S-10, the Sonoma, and the Hombre. The company's custom cam grind will not affect any smog laws, and it will add 14-plus hp. STS can also do custom grinds for turbo applications or any custom specifications. Packaged together for a special price or sold individually, the gold race needle-bearing fulcrum, roller-tip, extruded aluminum rocker arms increase your rocker arm ratio to 1.6 and add 10-plus hp.
For more information, contact: STS PERFORMANCE (562) 531-6328,
Photo 13/14   |   sport Truck Products afe Filters
Taco Muscle
aFe's new cold-air intake system for '05 Tacomas is crafted with a powdercoated heat shield and brushed aluminum cover that cuts induction noise. Performance comes from a 4-inch high-flow conical filter that feeds a free-flowing aluminum tube. The MAF sensor position is optimized for performance and trouble-free operation.
For more information, contact: ADVANCED FLOW ENGINEERING (aFe)(951) 493-7100,
Photo 14/14   |   sport Truck Products wilson Manifolds
Changing nitrous bottles can be a hassle, especially between rounds when time is a factor and tools are scarce. The gearheads at Nitrous Pro-Flow have devised a way to swap NO2 bottles in a snap without handtools. The Nutbuster wing-style wrench stays attached to the line fitting, and a plastic-tipped setscrew retains the wrench without damaging your aluminum fittings. A quick flick of the wrist detaches or re-fastens the fitting, which means you can swap bottles in seconds. CNC-machined from billet 6061-T6 aluminum, the Nitrous Pro-Flow Nutbuster is lightweight and durable, and is currently available for -4 and -6 line.
For more information, contact: NITROUS PRO-FLOW (954) 771-6216,



Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: