Subscribe to the Free

New Products - Custom Truck Parts - December 2006

Calin Head
Dec 1, 2006
Photo 2/11   |   sport Truck Products earls Plumbing
Keep It Cool!
Earl's Performance Products announces the availability of its new line of oil coolers with a black finish. The Temp-A-Cure oil coolers are manufactured in the U.S. from aircraft aluminum alloy with vacuum furnace-brazed joints. The corrugated screen design minimizes pressure drop, increases strength, and cools twice as much fluid with half the pressure of a typical tube and fin setup. The oil coolers are available in three widths with 7, 10, 13, 16, 19, 25, or 34 cooling rows and feature AN male inlets.
For more information, contact: Earl's Performance Products
(310) 609-1602,
Photo 3/11   |   sport Truck Products MGT Motorsports
Different Than a Pillar Pod
MGT Motorsports presents Blendmount, a system designed for mounting aftermarket accessories, giving them a factory installed look. This particular Blendmount was designed for the Edge Juice Attitude Monitor. The monitor is encapsulated in ABS plastic and is attached to the linkage of the rearview mirror, using a two-piece shaft collar that requires no drilling at installation. The mounting brackets are constructed of durable, lightweight, black anodized aluminum.
For more information, contact: MGT Motorsports
Photo 4/11   |   sport Truck Products quakerstate
This Oil Isn't for Cookin'
This new Q TorquePower Full Synthetic advanced motor oil formulation is engineered to help maximize torque in the engines of hard-working trucks and SUVs, to help give drivers the power they want for towing, hauling, and off-roading. In addition to helping maximize torque, Q provides protection against friction, resistance to thermal breakdown, and protection against engine stress under heavy loads. The proprietary heat-activated molecules in all the Q motor oils are activated as temperatures increase, to create a low-friction, ultra-heat-resistant lubrication film. Available viscosity grades include: 10W-30, 10W-40, 5W-30, 5W-20.
For more information, contact: Quaker State
Photo 5/11   |   sport Truck Products DJM Suspension
Dropped Taco
DJM Suspension introduces a 3/4 lowering kit for the '06 Toyota Tacoma. The 3-inch front drop is based on specially engineered upper and lower control arms. The rear comes down 4 inches, thanks to DJM's heavy-duty 4-inch steel lowering blocks, a C-notched frame, and carefully sized and positioned DJM bumpstops. When the 3/4 kit is installed, the Tacoma enjoys a vastly improved stance, while its ride quality and handling are preserved.
For more information, contact: DJM Suspension Inc.
(310) 538-1583,
Photo 6/11   |   sport Truck Products mr Gasket
Because Burns Suck
Hot coolant can cause severe injuries. Mr. Gasket's new ThermoCap has a built-in thermometer that displays coolant temperatures, providing a quick reference to help prevent such injuries. ThermoCap is available in several high-pressure variations, which are higher than an OE radiator cap. Using a high-pressure ThermoCap can increase your engine coolant's boiling temperature to as high as 272 degrees to prevent engine damage under even the most extreme operating conditions.For more information, contact: Mr. Gasket
Photo 7/11   |   sport Truck Products injen
New Lungs for the Ford
Just like the Ford F-150, Injen's Power-Flow intake was built tough and built to last. The intake features a built-in composite velocity stack and Injen's Powerbox to produce company claims of as much as 16 hp and 19 lb-ft of torque. The intakes are available in a polished aluminum or black wrinkle powdercoat and fit the '04-'05 F-150s.
For more information, contact: INJEN
Photo 8/11   |   sport Truck Products snapon
No Air Compressor Needed!
Snap-on introduces this 18-volt 1/2-inch cordless impact wrench, a great tool for technicians and enthusiasts seeking a comfortable, powerful, and portable tool for on-the-spot service tasks. Heat-treated alloy gears allow for 550 lb-ft of tightening torque and 3,000 impacts per minute. Additionally, the Impact wrench features a high-impact, glass-filled nylon housing and a patented airflow system for durability and tool life.For more information, contact:
Snap-on tools co.
(877) 762-7662,
Photo 9/11   |   sport Truck Products CGS Motorsports
Power Pipes
CGS is proud to introduce the first hybrid cat-back exhaust for the '07 Chevy Tahoe, Suburban, Avalanche, GMC Yukon, and Yukon XL. CGS uses a 100-percent all-welded stainless steel high-flow muffler, combined with mandrel-bent aluminized seamless tubing, and a polished stainless steel tip. The result is a great-looking system with throaty sound and gains in horsepower, torque, and mpg.
For more information, contact:
CGS Motorsports
(909) 444-5536
Photo 10/11   |   sport Truck Products shocker Glove
Digit Protection
Shocker Glove, a new sports glove brand, has just introduced the Love Glove. This glove features low-density palm padding for easy movement, yet it has enough energy absorption for power tool use. The integrated terry cloth thumb patch is handy when sweat begins to roll, and the Easy-Flex Neoprene wrist closure coupled with the Easy-Pull hook-and-loop rubber strap finish off a secure fit. The Love Glove is currently available in sizes small to XL, and in any color, so long as it is black.
For more information, contact: Shocker Glove Co.
Photo 11/11   |   sport Truck Products MTX
Universal Bumps
MTX Audio announces its newest OEM integration sound solution with the arrival of the X ThunderLink. This new amplified subwoofer enclosure is a solution for adding bass to any sound system. The X ThunderLink can be mounted either horizontally or vertically with the included mounting brackets and hardware. This subwoofer enclosure is constructed from injection molded ABS plastic, and the 10-inch subwoofer is powered by an onboard 100-watt amplifier.
For more information, contact: MTX Audio


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: