Subscribe to the Free

New Sport Truck Products - Speed Shop - June 2008

See It, Buy It!

Calin Head
Jun 1, 2008
Photo 2/16   |   new Truck Products aem Power
No Dirty Air
AEM has released its Brute Force HD intake system for '07 Cummins-equipped 6.7L Dodge Ram pickups. AEM manufactures the inlet pipe using roto-molded polypropylene that features an oil-free, reusable Dryflow filter, which enables a lot more airflow than stock. Each kit includes a heat shield with a powdercoated black finish (when applicable), a complete hardware kit, and comprehensive photo installation instructions.
Advanced Engine Management
(310) 484-2322
Photo 3/16   |   new Truck Products afe Power
Make It Rumble
advanced Flow engineering (aFe) has a new Mach Force XP 4-inch exhaust system for '01-'07 GM Silverado/Sierra Duramax motors for all cabs and bed lengths. The system is constructed of mandrel-bent, 4-inch 409 stainless steel and comes with an 8-inch muffler and monster 6-inch 304 stainless steel tip. All hardware, including band-style clamps, is supplied for easy installation. These kits also come in aluminized steel for the budget-minded truck nut.
Advanced Flow Engineering
(866) 503-9911
Photo 4/16   |   new Truck Products amp Research
More Length Without Pills
Made from high-strength aluminum, the Bed X-Tender installs easily in minutes, effectively turning a shortbed into a longbed by adding 18 inches with the tailgate open. The black powdercoated Bed X-Tender is durable and simple to operate. Position it outward with the tailgate open to secure bikes, motorcycles, ATVs, gardening tools, building materials, or other long cargo. Fold it forward with the tailgate up to create a convenient enclosed area to hold smaller items such as toolboxes or grocery bags.
AMP Research
(888) 983-2209
Photo 5/16   |   new Truck Products airbag Parts
Big-Wheel Arms
AVS is proud to be the exclusive distributor for The Choppin' Block control arms. These arms are designed to lay out '88-'06 fullsize GM trucks on 24-inch wheels and '82-'03 Chevy S-10s on 22s. Of course, low-profile tires and drop spindles are necessary. Features include 2-inch DOM tubing with 1/4-inch walls for the bushing collars, CNC-machined cross-shafts, 1/4-inch-thick lower airbag plates, and a heavy-duty powdercoat finish.
Photo 6/16   |   new Truck Products quick Fuel Technology
Corn Carb
High-octane power is now available for your carbureted street engine with the Quick Fuel Technology Super Street E85 carburetor. This new carb offers all the benefits of an electric choke as well as everyday driveability and added power capabilities with fewer emissions from E85 fuel. The E85 Super Street carb features an aluminum main body, dual billet metering blocks, Teflon-coated throttle shafts, low-profile button-head screws, aluminum float bowls, and clear sight windows.
Quick Fuel Technology
(270) 793-0900
Wheels From An Artist
From the drawing board to the mill, automotive designer Jason Rushforth is proud to debut Rushforth Wheels. With heavy emphasis on design and function, these two-piece, forged billet wheels come in diameters ranging from 17 to 24 inches in custom bolt patterns, widths, offsets, and finishes. Finish options include brushed, powdercoated, fully polished, and "smoked titanium."
Rushforth Wheels
(951) 609-3483
Photo 10/16   |   new Truck Products banks Power
Complete Oil Burners
Banks Power announces availability of complete Duramax diesel engines. These are new Duramax engines assembled by Dmax Ltd. in Moraine, Ohio. They include the following key components: cylinder block, cylinder heads, rotating assembly (crank, pistons, rods, etc.), valvetrain (cam, valves, lifters, springs, etc.), VG turbocharger, EGR system, fuel system (CP3 pump, injectors, HP rails), oil pan, water pump, flywheel housing (with GM bolt pattern), engine wiring harness, flexplate, and front damper. The engines come dressed with factory equipment only and do not include an ECU, fan, A/C compressor, alternator, or starter.
Gale Banks Engineering
(877) 278-0213
Build Your Own Exhaust
Heartthrob Exhaust offers build-it-yourself exhaust kits. Each kit contains four 4-foot lengths of tube, four 45-degree bends, and four 90-degree bends. You supply your own mufflers, hangers, and labor. The kits are available in mandrel-bent, 16-gauge aluminized, or 304 stainless in 2-1/4-, 2-1/2-, and 3-inch diameters.
Heartthrob Exhaust Accessories
(320) 693-0222
Photo 13/16   |   new Truck Products kicker
Big Boom, Little Room
If you have a standard-cab truck and still want big bass, check out the Kicker CompVT line of thin subwoofers from Stillwater Designs. They come in 6.5- and 8-inch sizes and can be mounted directly against the rear wall of a sealed or vented enclosure, permitting the woofers to perform in depths less than 3-3/8 inches.
Stillwater Designs
(800) 256-5425
Photo 14/16   |   new Truck Products eagle One
Keep It Clean
Eagle One has two new products in its detailing arsenal: Tire Shine Gel and A2Z All Wheel & Tire Cleaner. The thick Tire Shine Gel clings to the tire with no drip or sling. The result is a lasting, glossy shine that will complement great-looking wheels. The A2Z, which now comes in a convenient aerosol can, cleans wheels with a thick foam to dissolve road grime and brake dust. Just spray on and hose off.
Eagle One
(877) 5-Eagleone
Photo 15/16   |   new Truck Products performance Online
Move That Tank
The engineers at Performance Online have expanded their classic truck product line by offering the first rear-mount aluminum fuel tank for '73-'87 Chevrolet C10/C20 trucks. These fuel tanks mount behind the rear axle and offer increased fuel capacity and safety and replace the factory-recalled sidesaddle tank. Made of heavy-gauge aluminum, these 19-gallon tanks offer a lightweight design and are fully baffled.
Performance Online
(800) 638-1703
Photo 16/16   |   new Truck Products on The Ground Performance
Make It Handle
On The Ground Performance (OTGP) has a suspension upgrade kit for '99-'04 Ford F-150 Lightnings and '97-'03 F-150s. This kit includes tubular upper and lower control arms and a power rack-and-pinion kit. OTGP has redesigned the arms for the performance market. The upper ball joints have been relocated to the rear of the vehicle for an additional 3-plus degrees of positive caster, as well as being shifted outboard to compensate for lowered vehicles to achieve 0 degrees of camber if necessary. The ball-joint angle has been changed to correct angularity problems associated with lowered vehicles with stock upper control arms. The ball joint is now correctly aligned with the spindle. A 15:1 power rack-and-pinion comes with all the lines, fittings, stainless steel universal joints, steering shaft, and idler bearing as well as a fabricated steering-idler bracket and all hardware necessary for a complete bolt-in assembly.
On The Ground Performance
(410) 549-1112


Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: