Subscribe to the Free

New Products - Handling - Number 8

Maxwell Matthewson
Aug 1, 2011
New from Early Classic Enterprises is their ’73-’87 GM Truck LED light kit. Each panel has a wiring pigtail with a bulb base that plugs directly into the original bulb socket. Each kit comes with everything you need for quick installation.

For more information, contact Early Classic Enterprises at (888) 777-0395 or online at
Photo 2/10   |   new Products Handling led Light Kit
Derale Performance introduces another high-output fan to their electric fan line. This new fan features a 265-watt motor, balanced skewed-blades, and an aluminum shroud. Built to work under high static pressure load conditions, these fans are a great replacement for factory clutch fans.

To get more information on Derale’s lines of fans, contact them at (323) 266-3850 or
Photo 3/10   |   new Products Handling clutch Fan
For those of you who are looking for a clean-looking solution for your exhaust, Deeds Engineering now offers a full line of billet aluminum exhaust hangers. The hangers feature a soft, high-temp bushing that dampens exhaust vibration to your chassis. Available for 2¼ -inch, 2½-inch, and 3-inch exhaust tubing sizes and come in a natural machined finish or a hand-polished shine.

Deeds Engineering can be contacted at (818) 842-2500 or
Photo 4/10   |   new Products Handling aluminum Exhaust Hangers
Haneline has developed this all-in-one Gauge Pak to adapt to your truck dash without modifications. Everything is included: CNC billet rings, gauges, senders, lights, clips, turn signals, adaptors, and complete instructions. These kits will adapt to any wiring harness or custom fuel tank application.

See their website,, or call them at (229) 528-4335 for many other color options, and additional makes and models.
Photo 5/10   |   new Products Handling haneline Gauge Pack
Classic Performance Products now offers steering linkage kits for the 1958-1964 fullsize Chevrolet trucks. These kits are an improvement over the 1958-1962 factory replacement and are a direct replacement for 1963-1964 original manual steering; allowing for maximum performance and handling. The kit includes CPP’s complete new forged steel center link, pitman arm, idler arm with frame bracket and idler arm bushings.

To order a catalog, call (714) 522-2000 or visit
Photo 6/10   |   new Products Handling classic Performance Steering Linkage
Fat Man Fabrications has unveiled their new bolt-on hot rod IFS kits. These new front suspensions gain three inches of clearance and are an inch and a half narrower per side to help you tuck your tires into the fenders. Polished stainless steel control arms, QA-1 coilovers, airbags, and Wilwood brakes are all available options with the kit.

To learn more, contact Fatman at (704) 545-0369 or
Photo 7/10   |   new Products Handling fat Man Fabrication Bolt On Hot Rod Ifs Kits
Brothers Truck Parts carries bumpers for every 1947-1987 Chevy & GMC application. These bumpers are triple chrome-plated and are guaranteed for the life of the bumper against defects in material and craftsmanship.

For more information on these and other products from Brothers Truck Parts, contact them at (800) 977-2767 or online at
Photo 8/10   |   new Products Handling brothers Truck Parts Chevy Gmc Bumpers
MSD has a new line of Ready-to-Run billet distributors. Featuring a billet aluminum housing, maintenance-free magnetic pickup, and an oversized shaft that is guided by a sealed ball bearing, they are easily adjustable thanks to a mechanical advance. This allows a custom tailored timing curve to match what the engine needs, while a vacuum advance canister increases economy on long cruises. An added bonus is that the Ready-to-Run distributor now features a built-in rev limiter. The rpm limit is simple to set and you can grab the gas without worrying about over-rev damage from a missed shift.

For these and other ignition products, contact MSD at (915) 857-5200 or
Photo 9/10   |   new Products Handling msd Ready To Run Billet Distributors
Ididit Inc. has introduced their newest steering column that is made to fit the 1955-1959 Chevy truck and come in either floor shift or column shift. These direct bolt-in columns connect to your stock or aftermarket box as well as rack-and-pinion systems. Standard features include eight-position tilt, knobs & handles, four-way flashers, replacement floor mount & gasket, underdash mount, and a Delrin cover designed for your stock gearbox. Finishes include paintable steel, chrome, and black powdercoat.

For more information, visit or call (517) 424-0577.
Photo 10/10   |   new Products Handling ididit Steering Column Chevy Trucks



Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend

Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power

Subscribe Truckin Magazine

Subscribe to: