Due to the EU’s Global Data Protection Regulation, our website is currently unavailable to visitors from most European countries. We apologize for this inconvenience and encourage you to visit www.motortrend.com for the latest on new cars, car reviews and news, concept cars and auto show coverage, awards and much more.MOTORTREND.COM
  • |
  • |
  • Report: Ford F-150 Getting Next-Gen 4.8L V-8

Report: Ford F-150 Getting Next-Gen 4.8L V-8

New Engine Lifeline for Canada Operations

Nov 16, 2016
For the last five years, Ford has been aggressively pursuing downsized, turbocharged engines across its vehicle lineup. However, a significant percentage of F-150 buyers still prefer the naturally aspirated 5.0L Coyote V-8 over the 3.5L or 2.7L EcoBoost V-6 engines. Although the Coyote is still fairly fresh, dating from just 2011 and producing a competitive 385 hp and 387 hp from its 302 cubic inches, Ford is not letting up on the innovation and development. In a Reuters report about Ford’s $447 million investment in its Windsor, Ontario, Canada, engine plants, a report about a next-generation 4.8L V-8 engine leaked out.
Little is known about the engine other than the fact it will replace the 5.0L at the Essex engine plant and is expected to be a “high volume” engine. An engine specifically made for the Super Duty is also planned, presumably replacing the current 6.2L gas engine. The 6.8L V-10 will also reportedly continue to be produced for applications such as the F-650 and the E-Series cutaway vans.
The 4.8L will likely top the current 5.0L in power and fuel economy and will almost certainly be paired to the new 10-speed automatic that debuted on the 2017 F-150 with the 3.5L EcoBoost V-6. Direct or dual (direct and port) fuel injection will likely be part of the plan, as well as auto stop-start. Some sort of cylinder deactivation system could also appear to optimize economy at light loads. Taking the speculation a step further, it’s likely the 4.8L could be the basis for a future Mustang engine, either with or without forced induction. Interestingly, the 4.8L displacement translates to approximately 292 cubic inches, a displacement most commonly associated with the Ford Y-block V-8 from the ’50s.
Source: Reuters

POPULAR TRUCKS

MOST POPULAR

Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend
Magazine

PRINT DIGITAL
Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power
Magazine

PRINT DIGITAL
Subscribe Truckin Magazine

Subscribe to:

Truckin
Magazine

PRINT DIGITAL
SUBSCRIBE TO A MAGAZINE
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS